OXIESEC PANEL

Name	Size	Modified	Perms	Actions
📁 ..	-	01/22/2024 08:17:32 AM	rwxr-xr-x
📄 10-console-messages.conf	77 bytes	01/17/2018 10:35:48 PM	rw-r--r--	Delete
📄 10-ipv6-privacy.conf	490 bytes	01/17/2018 10:35:48 PM	rw-r--r--	Delete
📄 10-kernel-hardening.conf	726 bytes	01/17/2018 10:35:48 PM	rw-r--r--	Delete
📄 10-link-restrictions.conf	257 bytes	01/17/2018 10:35:48 PM	rw-r--r--	Delete
📄 10-lxd-inotify.conf	153 bytes	11/23/2018 06:58:51 PM	rw-r--r--	Delete
📄 10-magic-sysrq.conf	1.16 KB	01/17/2018 10:35:48 PM	rw-r--r--	Delete
📄 10-network-security.conf	509 bytes	01/17/2018 10:35:48 PM	rw-r--r--	Delete
📄 10-ptrace.conf	1.26 KB	01/17/2018 10:35:48 PM	rw-r--r--	Delete
📄 10-zeropage.conf	506 bytes	01/17/2018 10:35:48 PM	rw-r--r--	Delete
📄 99-cloudimg-ipv6.conf	185 bytes	10/14/2020 08:22:10 AM	rw-r--r--	Delete
📄 99-sysctl.conf	2.62 KB	01/17/2018 10:35:48 PM	rw-r--r--	Delete
📄 README	519 bytes	01/17/2018 10:35:48 PM	rw-r--r--	Delete

Editing: 99-sysctl.conf

#
# /etc/sysctl.conf - Configuration file for setting system variables
# See /etc/sysctl.d/ for additional system variables.
# See sysctl.conf (5) for information.
#

#kernel.domainname = example.com

# Uncomment the following to stop low-level messages on console
#kernel.printk = 3 4 1 3

##############################################################3
# Functions previously found in netbase
#

# Uncomment the next two lines to enable Spoof protection (reverse-path filter)
# Turn on Source Address Verification in all interfaces to
# prevent some spoofing attacks
#net.ipv4.conf.default.rp_filter=1
#net.ipv4.conf.all.rp_filter=1

# Uncomment the next line to enable TCP/IP SYN cookies
# See http://lwn.net/Articles/277146/
# Note: This may impact IPv6 TCP sessions too
#net.ipv4.tcp_syncookies=1

# Uncomment the next line to enable packet forwarding for IPv4
#net.ipv4.ip_forward=1

# Uncomment the next line to enable packet forwarding for IPv6
#  Enabling this option disables Stateless Address Autoconfiguration
#  based on Router Advertisements for this host
#net.ipv6.conf.all.forwarding=1

###################################################################
# Additional settings - these settings can improve the network
# security of the host and prevent against some network attacks
# including spoofing attacks and man in the middle attacks through
# redirection. Some network environments, however, require that these
# settings are disabled so review and enable them as needed.
#
# Do not accept ICMP redirects (prevent MITM attacks)
#net.ipv4.conf.all.accept_redirects = 0
#net.ipv6.conf.all.accept_redirects = 0
# _or_
# Accept ICMP redirects only for gateways listed in our default
# gateway list (enabled by default)
# net.ipv4.conf.all.secure_redirects = 1
#
# Do not send ICMP redirects (we are not a router)
#net.ipv4.conf.all.send_redirects = 0
#
# Do not accept IP source route packets (we are not a router)
#net.ipv4.conf.all.accept_source_route = 0
#net.ipv6.conf.all.accept_source_route = 0
#
# Log Martian Packets
#net.ipv4.conf.all.log_martians = 1
#

###################################################################
# Magic system request Key
# 0=disable, 1=enable all
# Debian kernels have this set to 0 (disable the key)
# See https://www.kernel.org/doc/Documentation/sysrq.txt
# for what other values do
#kernel.sysrq=1

###################################################################
# Protected links
#
# Protects against creating or following links under certain conditions
# Debian kernels have both set to 1 (restricted) 
# See https://www.kernel.org/doc/Documentation/sysctl/fs.txt
#fs.protected_hardlinks=0
#fs.protected_symlinks=0