OXIESEC PANEL

Name	Size	Modified	Perms
📁 ..	-	09/26/2021 03:27:18 AM	rwxr-xr-x
📄 2to3-2.7	96 bytes	07/01/2022 03:56:32 PM	rwxr-xr-x
📄 NF	963 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 VGAuthService	126.22 KB	08/16/2022 01:24:08 PM	rwxr-xr-x
📄 [	50.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 aa-enabled	22.16 KB	09/27/2018 06:20:54 PM	rwxr-xr-x
📄 aa-exec	22.16 KB	09/27/2018 06:20:54 PM	rwxr-xr-x
📄 ab	54.18 KB	06/23/2022 12:51:37 PM	rwxr-xr-x
📄 acpi_listen	14.27 KB	04/28/2017 04:28:10 AM	rwxr-xr-x
📄 acpidbg	1.58 KB	11/01/2022 04:52:05 PM	rwxr-xr-x
📄 add-apt-repository	7.24 KB	08/07/2020 02:07:43 PM	rwxr-xr-x
📄 addpart	22.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 addr2line	30.55 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 apport-bug	2.5 KB	11/11/2019 09:57:56 PM	rwxr-xr-x
📄 apport-cli	13.05 KB	05/10/2022 01:23:35 PM	rwxr-xr-x
📄 apport-collect	2.5 KB	11/11/2019 09:57:56 PM	rwxr-xr-x
📄 apport-unpack	1.81 KB	05/10/2022 01:23:35 PM	rwxr-xr-x
📄 apropos	46.98 KB	08/04/2018 07:16:12 PM	rwxr-xr-x
📄 apt	14.09 KB	12/07/2020 11:13:36 AM	rwxr-xr-x
📄 apt-add-repository	7.24 KB	08/07/2020 02:07:43 PM	rwxr-xr-x
📄 apt-cache	78.16 KB	12/07/2020 11:13:36 AM	rwxr-xr-x
📄 apt-cdrom	22.16 KB	12/07/2020 11:13:36 AM	rwxr-xr-x
📄 apt-config	22.09 KB	12/07/2020 11:13:36 AM	rwxr-xr-x
📄 apt-extracttemplates	22.16 KB	12/07/2020 11:13:36 AM	rwxr-xr-x
📄 apt-ftparchive	234.16 KB	12/07/2020 11:13:36 AM	rwxr-xr-x
📄 apt-get	42.16 KB	12/07/2020 11:13:36 AM	rwxr-xr-x
📄 apt-key	26.75 KB	12/07/2020 11:13:36 AM	rwxr-xr-x
📄 apt-mark	42.16 KB	12/07/2020 11:13:36 AM	rwxr-xr-x
📄 apt-sortpkgs	42.09 KB	12/07/2020 11:13:36 AM	rwxr-xr-x
📄 ar	58.24 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 arch	34.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 as	895.98 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 at	50.26 KB	02/20/2018 06:59:43 AM	rwxr-xr-x
📄 atq	50.26 KB	02/20/2018 06:59:43 AM	rwxr-xr-x
📄 atrm	50.26 KB	02/20/2018 06:59:43 AM	rwxr-xr-x
📄 automat-visualize3	402 bytes	08/28/2017 08:55:39 AM	rwxr-xr-x
📄 awk	642.65 KB	02/11/2018 05:02:41 AM	rwxr-xr-x
📄 b2sum	54.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 base32	38.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 base64	38.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 basename	34.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 bashbug	6.95 KB	04/18/2022 03:08:18 PM	rwxr-xr-x
📄 batch	152 bytes	02/20/2018 06:59:43 AM	rwxr-xr-x
📄 bc	90.7 KB	03/22/2018 04:20:34 PM	rwxr-xr-x
📄 bootctl	34.13 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 bsd-from	9.99 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 bsd-write	13.99 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 bsondump	13.35 MB	08/10/2021 07:24:55 PM	rwxr-xr-x
📄 busctl	66.09 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 byobu	8.07 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-config	996 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-ctrl-a	4.66 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-disable	1.26 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-disable-prompt	1.28 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-enable	1.15 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-enable-prompt	1.42 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-export	1.23 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-janitor	5.82 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-keybindings	1.47 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-launch	3.21 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-launcher	1.87 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-launcher-install	2.4 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-launcher-uninstall	1.52 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-layout	3.27 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-prompt	1.13 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-quiet	1.38 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-reconnect-sockets	3.22 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-screen	8.07 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-select-backend	1.42 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-select-profile	6.14 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-select-session	1012 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-shell	1.56 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-silent	1.28 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-status	5.87 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-status-detail	1.18 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-tmux	8.07 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-ugraph	4.56 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 byobu-ulevel	11.71 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 c++	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 c++filt	26.12 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 c89	428 bytes	05/07/2006 09:28:01 AM	rwxr-xr-x
📄 c89-gcc	428 bytes	05/07/2006 09:28:01 AM	rwxr-xr-x
📄 c99	454 bytes	04/11/2011 07:54:37 AM	rwxr-xr-x
📄 c99-gcc	454 bytes	04/11/2011 07:54:37 AM	rwxr-xr-x
📄 c_rehash	6.65 KB	07/04/2022 11:25:51 AM	rwxr-xr-x
📄 cal	28.79 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 calendar	30.48 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 captoinfo	82.11 KB	05/23/2018 08:08:27 AM	rwxr-xr-x
📄 catchsegv	3.25 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 catman	38.46 KB	08/04/2018 07:16:12 PM	rwxr-xr-x
📄 cautious-launcher	853 bytes	07/15/2016 12:06:12 PM	rwxr-xr-x
📄 cc	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 certbot	23.48 MB	02/23/2022 06:29:05 PM	rwxr-xr-x
📄 cftp3	380 bytes	03/22/2022 11:03:56 AM	rwxr-xr-x
📄 chacl	13.99 KB	04/21/2017 08:44:54 PM	rwxr-xr-x
📄 chage	70.13 KB	11/29/2022 12:25:19 PM	rwxr-xr-x
📄 chardet3	389 bytes	06/18/2017 09:51:08 PM	rwxr-xr-x
📄 chardetect3	389 bytes	06/18/2017 09:51:08 PM	rwxr-xr-x
📄 chattr	14 KB	06/02/2022 02:37:00 PM	rwxr-xr-x
📄 chcon	62.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 check-language-support	2.71 KB	06/28/2019 05:12:00 PM	rwxr-xr-x
📄 checkgid	5.99 KB	06/23/2022 12:51:37 PM	rwxr-xr-x
📄 chfn	74.7 KB	11/29/2022 12:25:19 PM	rwxr-xr-x
📄 chrt	30.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 chsh	43.48 KB	11/29/2022 12:25:19 PM	rwxr-xr-x
📄 cifscreds	18.34 KB	06/01/2022 04:19:46 PM	rwxr-xr-x
📄 ckbcomp	146.33 KB	04/23/2019 12:04:14 PM	rwxr-xr-x
📄 ckeygen3	386 bytes	03/22/2022 11:03:56 AM	rwxr-xr-x
📄 cksum	34.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 clear	10 KB	05/23/2018 08:08:27 AM	rwxr-xr-x
📄 clear_console	10.07 KB	04/18/2022 03:08:18 PM	rwxr-xr-x
📄 cloud-id	390 bytes	06/15/2022 04:38:21 PM	rwxr-xr-x
📄 cloud-init	394 bytes	06/15/2022 04:38:21 PM	rwxr-xr-x
📄 cloud-init-per	2.06 KB	05/18/2022 04:04:36 PM	rwxr-xr-x
📄 cmp	46.09 KB	08/04/2017 09:20:16 PM	rwxr-xr-x
📄 codepage	13.99 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 col	9.99 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 col1	963 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 col2	963 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 col3	963 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 col4	963 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 col5	963 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 col6	963 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 col7	963 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 col8	963 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 col9	963 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 colcrt	10 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 colrm	9.99 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 column	14.01 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 comm	38.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 compose	17.74 KB	07/15/2016 12:06:12 PM	rwxr-xr-x
📄 conch3	382 bytes	03/22/2022 11:03:56 AM	rwxr-xr-x
📄 corelist	12.53 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 cpan	7.96 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 cpan5.26-x86_64-linux-gnu	7.99 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 cpp	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 cpp-7	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 cpupower	1.58 KB	11/01/2022 04:52:05 PM	rwxr-xr-x
📄 crontab	38.43 KB	05/10/2022 08:59:19 PM	rwxr-xr-x
📄 csplit	50.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 ctail	958 bytes	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 ctstat	22.35 KB	07/15/2020 03:16:31 PM	rwxr-xr-x
📄 curl	218.07 KB	10/18/2022 04:45:13 PM	rwxr-xr-x
📄 cut	42.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 dbus-cleanup-sockets	9.98 KB	10/25/2022 01:03:19 PM	rwxr-xr-x
📄 dbus-daemon	231.04 KB	10/25/2022 01:03:19 PM	rwxr-xr-x
📄 dbus-monitor	21.99 KB	10/25/2022 01:03:19 PM	rwxr-xr-x
📄 dbus-run-session	9.98 KB	10/25/2022 01:03:19 PM	rwxr-xr-x
📄 dbus-send	25.98 KB	10/25/2022 01:03:19 PM	rwxr-xr-x
📄 dbus-update-activation-environment	13.98 KB	10/25/2022 01:03:19 PM	rwxr-xr-x
📄 dbus-uuidgen	9.98 KB	10/25/2022 01:03:19 PM	rwxr-xr-x
📄 dbwrap_tool	18.21 KB	01/25/2022 03:20:03 PM	rwxr-xr-x
📄 deallocvt	10.07 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 deb-systemd-helper	19.67 KB	10/25/2017 03:38:42 PM	rwxr-xr-x
📄 deb-systemd-invoke	4.33 KB	10/25/2017 03:38:42 PM	rwxr-xr-x
📄 debconf	2.79 KB	05/06/2019 04:30:30 PM	rwxr-xr-x
📄 debconf-apt-progress	11.27 KB	05/06/2019 04:30:30 PM	rwxr-xr-x
📄 debconf-communicate	608 bytes	05/06/2019 04:30:30 PM	rwxr-xr-x
📄 debconf-copydb	1.68 KB	05/06/2019 04:30:30 PM	rwxr-xr-x
📄 debconf-escape	647 bytes	05/06/2019 04:30:30 PM	rwxr-xr-x
📄 debconf-set-selections	2.87 KB	05/06/2019 04:30:30 PM	rwxr-xr-x
📄 debconf-show	1.78 KB	05/06/2019 04:30:30 PM	rwxr-xr-x
📄 delpart	22.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 delv	40.86 KB	09/20/2022 12:11:06 PM	rwxr-xr-x
📄 dh_bash-completion	2.49 KB	04/02/2018 02:16:46 AM	rwxr-xr-x
📄 dh_pypy	12.58 KB	03/26/2018 07:42:23 PM	rwxr-xr-x
📄 dh_python2	1.03 KB	04/16/2018 02:31:18 PM	rwxr-xr-x
📄 dh_python3	12.78 KB	03/26/2018 07:42:23 PM	rwxr-xr-x
📄 diff	142.34 KB	08/04/2017 09:20:16 PM	rwxr-xr-x
📄 diff3	62.21 KB	08/04/2017 09:20:16 PM	rwxr-xr-x
📄 dig	146.51 KB	09/20/2022 12:11:06 PM	rwxr-xr-x
📄 dircolors	46.19 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 dirmngr	533.55 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 dirmngr-client	106.76 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 dirname	30.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 do-release-upgrade	9.09 KB	07/09/2020 10:58:12 PM	rwxr-xr-x
📄 dpkg	290.5 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-architecture	12.55 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-buildflags	7.39 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-buildpackage	29.1 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-checkbuilddeps	7.33 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-deb	150.34 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-distaddfile	2.72 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-divert	138.41 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-genbuildinfo	16.38 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-genchanges	17.21 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-gencontrol	13.73 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-gensymbols	10.38 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-maintscript-helper	18.58 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-mergechangelogs	8.39 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-name	6.63 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-parsechangelog	4.33 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-query	146.4 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-scanpackages	8.23 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-scansources	8.95 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-shlibdeps	30.63 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-source	22.75 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-split	118.34 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-statoverride	70.25 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-trigger	66.26 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 dpkg-vendor	3.19 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 du	98.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 dumpkeys	166.52 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 dwp	2.75 MB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 eatmydata	2.74 KB	03/09/2018 06:37:20 PM	rwxr-xr-x
📄 ec2metadata	7.13 KB	04/13/2018 01:07:55 PM	rwxr-xr-x
📄 edit	17.74 KB	07/15/2016 12:06:12 PM	rwxr-xr-x
📄 editor	240.11 KB	03/06/2018 02:46:39 PM	rwxr-xr-x
📄 eject	30.69 KB	03/28/2017 04:22:15 AM	rwxr-xr-x
📄 elfedit	30.45 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 enc2xs	41.17 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 encguess	2.99 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 env	34.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 envsubst	34.08 KB	02/21/2019 02:40:49 PM	rwxr-xr-x
📄 eqn	193.19 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 ex	2.55 MB	09/13/2022 03:07:18 PM	rwxr-xr-x
📄 expand	38.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 expiry	22.27 KB	11/29/2022 12:25:19 PM	rwxr-xr-x
📄 expr	46.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 factor	74.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 faillog	18.29 KB	11/29/2022 12:25:19 PM	rwxr-xr-x
📄 faked-sysv	26.11 KB	01/08/2018 04:05:31 PM	rwxr-xr-x
📄 faked-tcp	30.1 KB	01/08/2018 04:05:31 PM	rwxr-xr-x
📄 fakeroot	3.76 KB	01/08/2018 04:05:31 PM	rwxr-xr-x
📄 fakeroot-sysv	3.76 KB	01/08/2018 04:05:31 PM	rwxr-xr-x
📄 fakeroot-tcp	3.76 KB	01/08/2018 04:05:31 PM	rwxr-xr-x
📄 fallocate	26.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 fcgistarter	9.99 KB	06/23/2022 12:51:37 PM	rwxr-xr-x
📄 file	22.26 KB	05/12/2020 01:31:09 PM	rwxr-xr-x
📄 find	232.5 KB	11/05/2017 05:16:48 PM	rwxr-xr-x
📄 flock	30.16 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 fmt	42.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 fold	34.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 free	18.08 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 from	9.99 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 ftp	98.7 KB	12/06/2016 03:23:57 PM	rwxr-xr-x
📄 g++	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 g++-7	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gawk	642.65 KB	02/11/2018 05:02:41 AM	rwxr-xr-x
📄 gcc	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcc-7	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcc-ar	30.47 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcc-ar-7	30.47 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcc-nm	30.47 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcc-nm-7	30.47 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcc-ranlib	30.47 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcc-ranlib-7	30.47 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcov	616.09 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcov-7	616.09 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcov-dump	499.93 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcov-dump-7	499.93 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcov-tool	535.99 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gcov-tool-7	535.99 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 gencat	22.22 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 geqn	193.19 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 getcifsacl	13.99 KB	06/01/2022 04:19:46 PM	rwxr-xr-x
📄 getconf	30.13 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 getent	30.49 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 getfacl	22.62 KB	04/21/2017 08:44:54 PM	rwxr-xr-x
📄 getkeycodes	10.07 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 getopt	14.07 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 gettext	34.08 KB	02/21/2019 02:40:49 PM	rwxr-xr-x
📄 gettext.sh	4.52 KB	02/21/2019 02:40:49 PM	rwxr-xr-x
📄 ginstall-info	43.09 KB	02/05/2018 02:48:18 PM	rwxr-xr-x
📄 git	2.25 MB	10/14/2022 02:15:33 PM	rwxr-xr-x
📄 git-receive-pack	2.25 MB	10/14/2022 02:15:33 PM	rwxr-xr-x
📄 git-shell	1.25 MB	10/14/2022 02:15:33 PM	rwxr-xr-x
📄 git-upload-archive	2.25 MB	10/14/2022 02:15:33 PM	rwxr-xr-x
📄 git-upload-pack	1.26 MB	10/14/2022 02:15:33 PM	rwxr-xr-x
📄 gold	2.97 MB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 gpasswd	74.05 KB	11/29/2022 12:25:19 PM	rwxr-xr-x
📄 gpg	997.6 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 gpg-agent	392.7 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 gpg-connect-agent	154.85 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 gpg-wks-server	187.02 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 gpg-zip	3.36 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 gpgconf	166.32 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 gpgparsemail	26.07 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 gpgsm	491.09 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 gpgsplit	78.45 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 gpgv	427.02 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 gpic	204.03 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 gprof	99.73 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 groff	105.31 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 grog	2.71 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 grops	165.72 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 grotty	121.34 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 groups	34.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 growpart	21.37 KB	04/13/2018 01:07:55 PM	rwxr-xr-x
📄 grub-editenv	239.93 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-file	659.79 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-fstest	789.65 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-glue-efi	235.77 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-kbdcomp	1.64 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-menulst2cfg	216.04 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-mkfont	264.34 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-mkimage	328.84 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-mklayout	240.09 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-mknetdir	373.41 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-mkpasswd-pbkdf2	244.12 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-mkrelpath	235.49 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-mkrescue	822.23 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-mkstandalone	449.74 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-mount	608.21 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-render-label	676.16 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-script-check	259.62 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 grub-syslinux2cfg	624.68 KB	02/24/2021 07:47:47 PM	rwxr-xr-x
📄 gtbl	126.2 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 h2ph	28.54 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 h2xs	59.44 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 hd	26.1 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 head	42.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 helpztags	2.46 KB	02/02/2018 08:37:32 PM	rwxr-xr-x
📄 hexdump	26.1 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 host	126.66 KB	09/20/2022 12:11:06 PM	rwxr-xr-x
📄 hostid	30.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 hostnamectl	18.07 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 htcacheclean	30 KB	06/23/2022 12:51:37 PM	rwxr-xr-x
📄 htdbm	21.99 KB	06/23/2022 12:51:37 PM	rwxr-xr-x
📄 htdigest	13.99 KB	06/23/2022 12:51:37 PM	rwxr-xr-x
📄 htop	180.68 KB	02/17/2018 06:27:46 PM	rwxr-xr-x
📄 htpasswd	17.99 KB	06/23/2022 12:51:37 PM	rwxr-xr-x
📄 hwe-support-status	10.58 KB	06/03/2020 06:41:50 PM	rwxr-xr-x
📄 i386	18.34 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 iconv	62.25 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 id	42.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 igawk	3.11 KB	02/11/2018 05:02:41 AM	rwxr-xr-x
📄 info	245.72 KB	02/05/2018 02:48:18 PM	rwxr-xr-x
📄 infobrowser	245.72 KB	02/05/2018 02:48:18 PM	rwxr-xr-x
📄 infocmp	58.07 KB	05/23/2018 08:08:27 AM	rwxr-xr-x
📄 infotocap	82.11 KB	05/23/2018 08:08:27 AM	rwxr-xr-x
📄 innochecksum	3.52 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 install	142.25 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 install-info	43.09 KB	02/05/2018 02:48:18 PM	rwxr-xr-x
📄 install_compass	14.85 KB	12/19/2013 05:41:46 AM	rwxr-xr-x
📄 instmodsh	4.27 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 ionice	26.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 ipcmk	26.14 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 ipcrm	26.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 ipcs	50.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 iptables-xml	92.74 KB	11/12/2017 02:52:05 AM	rwxr-xr-x
📄 ischroot	10.04 KB	12/30/2017 06:15:02 PM	rwxr-xr-x
📄 iscsiadm	381.95 KB	05/11/2020 01:27:31 AM	rwxr-xr-x
📄 join	46.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 json_pp	3.87 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 jsondiff	1018 bytes	10/28/2017 08:10:15 PM	rwxr-xr-x
📄 jsonpatch	3.58 KB	10/28/2017 08:10:15 PM	rwxr-xr-x
📄 jsonpointer	1.31 KB	05/01/2016 11:14:11 PM	rwxr-xr-x
📄 jsonschema	398 bytes	11/15/2017 07:43:29 PM	rwxr-xr-x
📄 kbdinfo	14.07 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 kbxutil	158.69 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 keep-one-running	3.51 KB	01/15/2014 10:24:04 PM	rwxr-xr-x
📄 kernel-install	4.4 KB	01/28/2018 03:58:17 PM	rwxr-xr-x
📄 keyring	385 bytes	01/09/2018 12:15:19 PM	rwxr-xr-x
📄 killall	27.12 KB	12/11/2018 03:46:04 PM	rwxr-xr-x
📄 kmodsign	14.13 KB	02/05/2018 04:53:19 PM	rwxr-xr-x
📄 landscape-sysinfo	624 bytes	02/20/2020 05:35:22 PM	rwxr-xr-x
📄 last	42.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 lastb	42.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 lastlog	18.07 KB	11/29/2022 12:25:19 PM	rwxr-xr-x
📄 lcf	7.6 KB	02/26/2018 12:58:23 AM	rwxr-xr-x
📄 ld	1.7 MB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 ld.bfd	1.7 MB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 ld.gold	2.97 MB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 ldd	5.29 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 less	166.76 KB	12/01/2017 04:11:09 AM	rwxr-xr-x
📄 lessecho	10.02 KB	12/01/2017 04:11:09 AM	rwxr-xr-x
📄 lessfile	8.36 KB	12/01/2017 04:11:09 AM	rwxr-xr-x
📄 lesskey	19.39 KB	12/01/2017 04:11:09 AM	rwxr-xr-x
📄 lesspipe	8.36 KB	12/01/2017 04:11:09 AM	rwxr-xr-x
📄 lexgrog	90.57 KB	08/04/2018 07:16:12 PM	rwxr-xr-x
📄 libnetcfg	15.41 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 link	30.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 linux-boot-prober	1.54 KB	01/21/2017 03:43:27 PM	rwxr-xr-x
📄 linux-check-removal	3.99 KB	06/21/2016 02:48:57 AM	rwxr-xr-x
📄 linux-update-symlinks	6.17 KB	06/05/2016 01:13:24 AM	rwxr-xr-x
📄 linux-version	2.63 KB	09/17/2016 06:12:36 AM	rwxr-xr-x
📄 linux32	18.34 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 linux64	18.34 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 lnstat	22.35 KB	07/15/2020 03:16:31 PM	rwxr-xr-x
📄 loadkeys	206.57 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 loadunimap	26.13 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 locale	49.41 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 locale-check	10 KB	08/13/2020 06:59:47 PM	rwxr-xr-x
📄 localectl	22.07 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 localedef	330.8 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 locate	42.08 KB	03/01/2018 04:07:16 PM	rwxr-xr-x
📄 logger	46.67 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 logname	30.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 logresolve	10 KB	06/23/2022 12:51:37 PM	rwxr-xr-x
📄 look	10.23 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 lorder	2.82 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 lsattr	10 KB	06/02/2022 02:37:00 PM	rwxr-xr-x
📄 lsb_release	3.55 KB	08/07/2017 09:55:07 PM	rwxr-xr-x
📄 lscpu	70.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 lshw	670.95 KB	07/10/2018 02:25:42 PM	rwxr-xr-x
📄 lsinitramfs	625 bytes	08/12/2020 08:12:11 PM	rwxr-xr-x
📄 lsipc	70.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 lslocks	34.41 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 lslogins	62.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 lsmem	42.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 lsns	38.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 lsof	159.4 KB	10/28/2015 04:57:56 PM	rwxr-xr-x
📄 lspci	79.67 KB	02/10/2019 06:25:12 PM	rwxr-xr-x
📄 lspgpot	1.06 KB	08/28/2017 10:22:54 AM	rwxr-xr-x
📄 lsusb	114.43 KB	04/21/2017 08:59:17 PM	rwxr-xr-x
📄 ltrace	325.21 KB	10/13/2016 06:20:41 AM	rwxr-xr-x
📄 lxc	10.28 MB	11/23/2018 06:58:51 PM	rwxr-xr-x
📄 lxcfs	18.07 KB	03/31/2020 04:20:51 PM	rwxr-xr-x
📄 lxd	105 bytes	11/23/2018 06:58:51 PM	rwxr-xr-x
📄 lynx	1.84 MB	02/19/2018 09:15:35 PM	rwxr-xr-x
📄 lzcat	74.36 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 lzcmp	6.48 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 lzdiff	6.48 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 lzegrep	5.76 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 lzfgrep	5.76 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 lzgrep	5.76 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 lzless	1.76 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 lzma	74.36 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 lzmainfo	10.07 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 lzmore	2.11 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 make	217.57 KB	04/17/2018 12:12:28 PM	rwxr-xr-x
📄 make-first-existing-target	4.79 KB	04/17/2018 12:12:28 PM	rwxr-xr-x
📄 man	104.5 KB	08/04/2018 07:16:12 PM	rwxr-xr-x
📄 mandb	126.72 KB	08/04/2018 07:16:12 PM	rwxr-xr-x
📄 manifest	1.9 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 manpath	30.47 KB	08/04/2018 07:16:12 PM	rwxr-xr-x
📄 mapscrn	22.13 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 mawk	122.48 KB	04/03/2018 12:34:18 PM	rwxr-xr-x
📄 mcookie	30.14 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 md5sum	42.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 md5sum.textutils	42.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 mdig	42.13 KB	09/20/2022 12:11:06 PM	rwxr-xr-x
📄 mesg	10.07 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 migrate-pubring-from-classic-gpg	2.14 KB	01/16/2021 02:47:37 PM	rwxr-xr-x
📄 miniterm	34.28 KB	04/09/2018 11:57:25 AM	rwxr-xr-x
📄 mk_modmap	15.78 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 mkfifo	62.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 mksquashfs	184.99 KB	09/14/2021 08:43:17 AM	rwxr-xr-x
📄 mlocate	42.08 KB	03/01/2018 04:07:16 PM	rwxr-xr-x
📄 mokutil	47.23 KB	10/11/2018 06:55:12 PM	rwxr-xr-x
📄 mongo	55.24 MB	12/19/2013 05:41:46 AM	rwxr-xr-x
📄 mongod	102.42 MB	12/19/2013 05:41:46 AM	rwxr-xr-x
📄 mongodump	15.99 MB	08/10/2021 07:24:58 PM	rwxr-xr-x
📄 mongoexport	15.66 MB	08/10/2021 07:25:06 PM	rwxr-xr-x
📄 mongofiles	16.51 MB	08/10/2021 07:25:14 PM	rwxr-xr-x
📄 mongoimport	15.92 MB	08/10/2021 07:25:04 PM	rwxr-xr-x
📄 mongorestore	16.35 MB	08/10/2021 07:25:01 PM	rwxr-xr-x
📄 mongos	71.3 MB	12/19/2013 05:41:46 AM	rwxr-xr-x
📄 mongosh	138.91 MB	09/21/2021 05:38:31 PM	rwxr-xr-x
📄 mongostat	15.51 MB	08/10/2021 07:25:09 PM	rwxr-xr-x
📄 mongotop	15.19 MB	08/10/2021 07:25:11 PM	rwxr-xr-x
📄 mtr	71.94 KB	11/02/2017 02:48:40 AM	rwxr-xr-x
📄 mtr-packet	25.99 KB	11/02/2017 02:48:40 AM	rwxr-xr-x
📄 mtrace	6.34 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 my_print_defaults	3.45 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 myisam_ftdump	3.75 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 myisamchk	3.85 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 myisamlog	3.73 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 myisampack	3.78 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysql	3.81 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysql_config_editor	3.46 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysql_embedded	21.17 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysql_install_db	5.01 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysql_plugin	3.45 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysql_secure_installation	3.69 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysql_ssl_rsa_setup	3.49 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysql_tzinfo_to_sql	3.4 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysql_upgrade	4.32 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqladmin	3.71 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqlanalyze	3.73 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqlbinlog	3.96 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqlcheck	3.73 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqld_multi	26.3 KB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqld_safe	27.16 KB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqldump	3.78 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqldumpslow	7.66 KB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqlimport	3.7 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqloptimize	3.73 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqlpump	4.17 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqlrepair	3.73 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqlreport	38.1 KB	08/19/2021 04:34:52 PM	rwxr-xr-x
📄 mysqlshow	3.7 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 mysqlslap	3.71 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 namei	26.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 nawk	642.65 KB	02/11/2018 05:02:41 AM	rwxr-xr-x
📄 ncal	28.79 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 ncdu	70.57 KB	09/26/2016 08:03:26 AM	rwxr-xr-x
📄 neqn	908 bytes	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 net	882.82 KB	01/25/2022 03:20:03 PM	rwxr-xr-x
📄 netkit-ftp	98.7 KB	12/06/2016 03:23:57 PM	rwxr-xr-x
📄 networkd-dispatcher	19.53 KB	05/04/2022 01:51:28 PM	rwxr-xr-x
📄 newgidmap	36.27 KB	11/29/2022 12:25:19 PM	rwxr-xr-x
📄 newgrp	39.4 KB	11/29/2022 12:25:19 PM	rwxr-xr-x
📄 newuidmap	36.27 KB	11/29/2022 12:25:19 PM	rwxr-xr-x
📄 ngettext	34.08 KB	02/21/2019 02:40:49 PM	rwxr-xr-x
📄 nice	34.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 nl	42.27 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 nm	43.27 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 nmblookup	114.16 KB	01/25/2022 03:20:03 PM	rwxr-xr-x
📄 nohup	34.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 nproc	34.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 nroff	3.25 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 nsenter	30.28 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 nslookup	130.51 KB	09/20/2022 12:11:06 PM	rwxr-xr-x
📄 nstat	26.07 KB	07/15/2020 03:16:31 PM	rwxr-xr-x
📄 nsupdate	66.02 KB	09/20/2022 12:11:06 PM	rwxr-xr-x
📄 ntfsdecrypt	46.12 KB	11/01/2022 11:57:16 AM	rwxr-xr-x
📄 numfmt	62.24 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 objcopy	230.2 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 objdump	404.55 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 od	66.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 on_ac_power	2.16 KB	03/12/2018 12:51:32 AM	rwxr-xr-x
📄 openssl	706.98 KB	07/04/2022 11:25:51 AM	rwxr-xr-x
📄 os-prober	4.44 KB	01/31/2017 08:30:39 PM	rwxr-xr-x
📄 pager	166.76 KB	12/01/2017 04:11:09 AM	rwxr-xr-x
📄 partx	86.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 passwd	58.24 KB	11/29/2022 12:25:19 PM	rwxr-xr-x
📄 paste	34.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 pastebinit	16.25 KB	03/01/2016 05:52:32 AM	rwxr-xr-x
📄 patch	178.37 KB	07/23/2019 12:12:54 PM	rwxr-xr-x
📄 pathchk	34.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 pbget	2.51 KB	02/29/2016 04:14:33 PM	rwxr-xr-x
📄 pbput	2.51 KB	02/29/2016 04:14:33 PM	rwxr-xr-x
📄 pbputs	2.51 KB	02/29/2016 04:14:33 PM	rwxr-xr-x
📄 pcimodules	14.13 KB	02/10/2019 06:25:12 PM	rwxr-xr-x
📄 pdb	45.02 KB	07/01/2022 03:56:32 PM	rwxr-xr-x
📄 pdb2.7	45.02 KB	07/01/2022 03:56:32 PM	rwxr-xr-x
📄 pdb3	59.87 KB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 pdb3.6	59.87 KB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 peekfd	13.99 KB	12/11/2018 03:46:04 PM	rwxr-xr-x
📄 perf	1.58 KB	11/01/2022 04:52:05 PM	rwxr-xr-x
📄 perl	2 MB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 perl5.26-x86_64-linux-gnu	9.98 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 perl5.26.1	2 MB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 perlbug	44.78 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 perldoc	125 bytes	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 perlivp	10.61 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 perlthanks	44.78 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 perror	3.58 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 pftp	98.7 KB	12/06/2016 03:23:57 PM	rwxr-xr-x
📄 pgrep	26.09 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 phar	14.47 KB	11/02/2022 09:09:52 AM	rwxr-xr-x
📄 phar.phar	14.47 KB	11/02/2022 09:09:52 AM	rwxr-xr-x
📄 phar.phar7.2	14.47 KB	11/02/2022 09:09:52 AM	rwxr-xr-x
📄 phar7.2	14.47 KB	11/02/2022 09:09:52 AM	rwxr-xr-x
📄 php	4.68 MB	11/02/2022 09:09:52 AM	rwxr-xr-x
📄 php7.2	4.68 MB	11/02/2022 09:09:52 AM	rwxr-xr-x
📄 pic	204.03 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 pico	240.11 KB	03/06/2018 02:46:39 PM	rwxr-xr-x
📄 piconv	8.16 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 pinentry	62.49 KB	02/06/2018 01:18:30 AM	rwxr-xr-x
📄 pinentry-curses	62.49 KB	02/06/2018 01:18:30 AM	rwxr-xr-x
📄 pinky	38.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 pip3	293 bytes	04/30/2021 06:11:12 PM	rwxr-xr-x
📄 pkaction	13.99 KB	01/12/2022 12:34:00 PM	rwxr-xr-x
📄 pkcheck	18.07 KB	01/12/2022 12:34:00 PM	rwxr-xr-x
📄 pkexec	21.99 KB	01/12/2022 12:34:00 PM	rwxr-xr-x
📄 pkill	26.09 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 pkttyagent	13.99 KB	01/12/2022 12:34:00 PM	rwxr-xr-x
📄 pl2pm	4.43 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 pldd	14.22 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 pmap	30.09 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 pod2html	4.04 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 pod2man	14.73 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 pod2text	10.72 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 pod2usage	3.86 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 podchecker	3.57 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 podselect	2.47 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 pollinate	8.54 KB	05/29/2018 08:13:20 PM	rwxr-xr-x
📄 pr	70.27 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 preconv	46.2 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 print	17.74 KB	07/15/2016 12:06:12 PM	rwxr-xr-x
📄 printenv	30.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 printerbanner	22 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 printf	50.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 prlimit	34.59 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 prove	13.27 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 prtstat	18.07 KB	12/11/2018 03:46:04 PM	rwxr-xr-x
📄 psfaddtable	17.99 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 psfgettable	17.99 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 psfstriptable	17.99 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 psfxtable	17.99 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 pslog	9.99 KB	12/11/2018 03:46:04 PM	rwxr-xr-x
📄 pstree	26.95 KB	12/11/2018 03:46:04 PM	rwxr-xr-x
📄 pstree.x11	26.95 KB	12/11/2018 03:46:04 PM	rwxr-xr-x
📄 ptar	3.47 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 ptardiff	2.57 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 ptargrep	4.29 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 ptx	70.24 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 purge-old-kernels	1.12 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 pwdx	10.07 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 py3clean	7.63 KB	10/25/2018 11:11:00 AM	rwxr-xr-x
📄 py3compile	11.83 KB	10/25/2018 11:11:00 AM	rwxr-xr-x
📄 py3versions	11.44 KB	10/25/2018 11:11:00 AM	rwxr-xr-x
📄 pybuild	25.03 KB	03/26/2018 07:42:23 PM	rwxr-xr-x
📄 pyclean	4.03 KB	04/16/2018 02:31:18 PM	rwxr-xr-x
📄 pycompile	11.62 KB	04/16/2018 02:31:18 PM	rwxr-xr-x
📄 pydoc	79 bytes	07/01/2022 03:56:32 PM	rwxr-xr-x
📄 pydoc2.7	79 bytes	07/01/2022 03:56:32 PM	rwxr-xr-x
📄 pydoc3	79 bytes	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 pydoc3.6	79 bytes	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 pygettext	21.56 KB	07/01/2022 03:56:32 PM	rwxr-xr-x
📄 pygettext2.7	21.56 KB	07/01/2022 03:56:32 PM	rwxr-xr-x
📄 pygettext3	21.04 KB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 pygettext3.6	21.04 KB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 pyhtmlizer3	392 bytes	03/22/2022 11:03:56 AM	rwxr-xr-x
📄 pyjwt3	372 bytes	07/19/2022 06:23:32 AM	rwxr-xr-x
📄 python	3.46 MB	07/01/2022 03:56:32 PM	rwxr-xr-x
📄 python2	3.46 MB	07/01/2022 03:56:32 PM	rwxr-xr-x
📄 python2.7	3.46 MB	07/01/2022 03:56:32 PM	rwxr-xr-x
📄 python3	4.32 MB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 python3-config	3.21 KB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 python3-jsondiff	1018 bytes	10/28/2017 08:10:15 PM	rwxr-xr-x
📄 python3-jsonpatch	3.58 KB	10/28/2017 08:10:15 PM	rwxr-xr-x
📄 python3-jsonpointer	1.31 KB	05/01/2016 11:14:11 PM	rwxr-xr-x
📄 python3-jsonschema	398 bytes	11/15/2017 07:43:29 PM	rwxr-xr-x
📄 python3.6	4.32 MB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 python3.6-config	3.21 KB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 python3.6m	4.32 MB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 python3.6m-config	3.21 KB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 python3m	4.32 MB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 python3m-config	3.21 KB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 pyvenv	436 bytes	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 pyvenv-3.6	436 bytes	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 pyversions	14.75 KB	04/16/2018 02:31:18 PM	rwxr-xr-x
📄 ranlib	58.27 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 rcp	98.14 KB	08/11/2021 06:02:09 PM	rwxr-xr-x
📄 rdma	26.07 KB	07/15/2020 03:16:31 PM	rwxr-xr-x
📄 readelf	582.46 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 realpath	46.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 rename.ul	14.07 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 renice	14.07 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 replace	3.42 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 reset	22 KB	05/23/2018 08:08:27 AM	rwxr-xr-x
📄 resizecons	18.13 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 resizepart	38.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 resolveip	3.44 MB	10/19/2022 12:58:42 PM	rwxr-xr-x
📄 rev	10.07 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 rgrep	30 bytes	07/11/2017 01:19:59 PM	rwxr-xr-x
📄 rlogin	710.79 KB	08/11/2021 06:02:09 PM	rwxr-xr-x
📄 rotatelogs	18.07 KB	06/23/2022 12:51:37 PM	rwxr-xr-x
📄 routef	208 bytes	07/15/2020 03:16:31 PM	rwxr-xr-x
📄 routel	1.62 KB	07/15/2020 03:16:31 PM	rwxr-xr-x
📄 rpcgen	98.53 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 rsh	710.79 KB	08/11/2021 06:02:09 PM	rwxr-xr-x
📄 rsync	488.3 KB	08/16/2022 06:38:38 PM	rwxr-xr-x
📄 rtstat	22.35 KB	07/15/2020 03:16:31 PM	rwxr-xr-x
📄 run-mailcap	17.74 KB	07/15/2016 12:06:12 PM	rwxr-xr-x
📄 run-one	3.51 KB	01/15/2014 10:24:04 PM	rwxr-xr-x
📄 run-one-constantly	3.51 KB	01/15/2014 10:24:04 PM	rwxr-xr-x
📄 run-one-until-failure	3.51 KB	01/15/2014 10:24:04 PM	rwxr-xr-x
📄 run-one-until-success	3.51 KB	01/15/2014 10:24:04 PM	rwxr-xr-x
📄 run-this-one	3.51 KB	01/15/2014 10:24:04 PM	rwxr-xr-x
📄 runcon	34.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 rview	2.55 MB	09/13/2022 03:07:18 PM	rwxr-xr-x
📄 rvim	2.55 MB	09/13/2022 03:07:18 PM	rwxr-xr-x
📄 samba-regedit	94.93 KB	01/25/2022 03:20:03 PM	rwxr-xr-x
📄 samba-tool	1.52 KB	01/25/2022 03:20:03 PM	rwxr-xr-x
📄 savelog	10.22 KB	12/30/2017 06:15:02 PM	rwxr-xr-x
📄 sbattach	50.3 KB	02/05/2018 04:53:19 PM	rwxr-xr-x
📄 sbkeysync	54.55 KB	02/05/2018 04:53:19 PM	rwxr-xr-x
📄 sbsiglist	50.39 KB	02/05/2018 04:53:19 PM	rwxr-xr-x
📄 sbsign	50.36 KB	02/05/2018 04:53:19 PM	rwxr-xr-x
📄 sbvarsign	54.42 KB	02/05/2018 04:53:19 PM	rwxr-xr-x
📄 sbverify	50.33 KB	02/05/2018 04:53:19 PM	rwxr-xr-x
📄 scp	98.14 KB	08/11/2021 06:02:09 PM	rwxr-xr-x
📄 screen	455.01 KB	02/23/2021 05:46:52 PM	rwxr-xr-x
📄 screendump	9.99 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 script	30.07 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 scriptreplay	26.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 sdiff	50.09 KB	08/04/2017 09:20:16 PM	rwxr-xr-x
📄 see	17.74 KB	07/15/2016 12:06:12 PM	rwxr-xr-x
📄 select-editor	2.38 KB	03/12/2018 10:17:53 AM	rwxr-xr-x
📄 sensible-browser	1.18 KB	03/12/2018 10:17:53 AM	rwxr-xr-x
📄 sensible-editor	1.08 KB	03/12/2018 10:17:53 AM	rwxr-xr-x
📄 sensible-pager	433 bytes	03/12/2018 10:17:53 AM	rwxr-xr-x
📄 seq	46.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 setarch	18.34 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 setcifsacl	17.99 KB	06/01/2022 04:19:46 PM	rwxr-xr-x
📄 setfacl	34.68 KB	04/21/2017 08:44:54 PM	rwxr-xr-x
📄 setkeycodes	10.07 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 setleds	14.05 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 setlogcons	10.07 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 setmetamode	10.1 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 setpci	26.08 KB	02/10/2019 06:25:12 PM	rwxr-xr-x
📄 setsid	10.07 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 setterm	42.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 sftp	150.35 KB	08/11/2021 06:02:09 PM	rwxr-xr-x
📄 sg	39.4 KB	11/29/2022 12:25:19 PM	rwxr-xr-x
📄 sha1sum	46.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 sha224sum	54.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 sha256sum	54.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 sha384sum	58.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 sha512sum	58.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 shasum	9.15 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 showconsolefont	18.07 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 showkey	14.07 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 shred	58.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 shuf	54.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 size	30.3 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 skill	26.08 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 slabtop	18.08 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 slogin	710.79 KB	08/11/2021 06:02:09 PM	rwxr-xr-x
📄 smbinfo	23.46 KB	06/01/2022 04:19:46 PM	rwxr-xr-x
📄 smbpasswd	29.99 KB	01/25/2022 03:20:03 PM	rwxr-xr-x
📄 snap	23.48 MB	02/23/2022 06:29:05 PM	rwxr-xr-x
📄 snapctl	8.32 MB	02/23/2022 06:29:05 PM	rwxr-xr-x
📄 snapfuse	38.13 KB	02/23/2022 06:29:05 PM	rwxr-xr-x
📄 snice	26.08 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 soelim	30.2 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 sort	110.47 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 sos	596 bytes	09/19/2022 12:43:47 PM	rwxr-xr-x
📄 sos-collector	1.04 KB	09/19/2022 12:43:47 PM	rwxr-xr-x
📄 sosreport	1.03 KB	09/19/2022 12:43:47 PM	rwxr-xr-x
📄 sotruss	4.21 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 splain	18.7 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 split	54.63 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 splitfont	9.99 KB	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 sprof	26.21 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 ssh	710.79 KB	08/11/2021 06:02:09 PM	rwxr-xr-x
📄 ssh-add	338.13 KB	08/11/2021 06:02:09 PM	rwxr-xr-x
📄 ssh-agent	354.14 KB	08/11/2021 06:02:09 PM	rwxr-xr-x
📄 ssh-argv0	1.42 KB	01/16/2018 05:39:31 PM	rwxr-xr-x
📄 ssh-copy-id	10.41 KB	10/02/2017 07:34:26 PM	rwxr-xr-x
📄 ssh-import-id	1.73 KB	05/16/2018 11:40:43 PM	rwxr-xr-x
📄 ssh-import-id-gh	782 bytes	01/30/2016 05:11:11 AM	rwxr-xr-x
📄 ssh-import-id-lp	782 bytes	01/30/2016 05:11:25 AM	rwxr-xr-x
📄 ssh-keygen	410.16 KB	08/11/2021 06:02:09 PM	rwxr-xr-x
📄 ssh-keyscan	410.16 KB	08/11/2021 06:02:09 PM	rwxr-xr-x
📄 stat	78.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 stdbuf	46.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 strace	1.31 MB	04/11/2018 02:18:47 PM	rwxr-xr-x
📄 strace-log-merge	2.58 KB	02/13/2018 11:00:00 PM	rwxr-xr-x
📄 strings	30.5 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 strip	230.2 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 sudo	145.59 KB	01/19/2021 02:36:00 PM	rwxr-xr-x
📄 sudoedit	145.59 KB	01/19/2021 02:36:00 PM	rwxr-xr-x
📄 sudoreplay	54.81 KB	01/19/2021 02:36:00 PM	rwxr-xr-x
📄 sum	38.19 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 symcryptrun	110.73 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 systemd-analyze	1.49 MB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 systemd-cat	10.07 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 systemd-cgls	14.07 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 systemd-cgtop	30.09 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 systemd-delta	22.07 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 systemd-detect-virt	10.06 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 systemd-mount	42.09 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 systemd-path	10.06 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 systemd-resolve	86.07 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 systemd-run	42.07 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 systemd-socket-activate	18.07 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 systemd-stdio-bridge	14.07 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 systemd-umount	42.09 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 tabs	13.99 KB	05/23/2018 08:08:27 AM	rwxr-xr-x
📄 tac	38.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 tail	66.24 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 taskset	30.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 tbl	126.2 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 tee	34.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 telnet	108.42 KB	11/07/2016 06:06:40 PM	rwxr-xr-x
📄 telnet.netkit	108.42 KB	11/07/2016 06:06:40 PM	rwxr-xr-x
📄 test	46.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 testparm	29.99 KB	01/25/2022 03:20:03 PM	rwxr-xr-x
📄 tic	82.11 KB	05/23/2018 08:08:27 AM	rwxr-xr-x
📄 time	14.38 KB	04/21/2017 08:57:03 PM	rwxr-xr-x
📄 timedatectl	22.07 KB	09/06/2022 03:18:05 AM	rwxr-xr-x
📄 timeout	38.63 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 tkconch3	386 bytes	03/22/2022 11:03:56 AM	rwxr-xr-x
📄 tload	14.09 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 tmux	563.56 KB	07/04/2019 07:45:07 PM	rwxr-xr-x
📄 toe	13.99 KB	05/23/2018 08:08:27 AM	rwxr-xr-x
📄 top	105.77 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 touch	86.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 tput	18.02 KB	05/23/2018 08:08:27 AM	rwxr-xr-x
📄 tr	46.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 tracepath	14.01 KB	06/28/2019 11:05:23 AM	rwxr-xr-x
📄 traceroute6	18.02 KB	06/28/2019 11:05:23 AM	rwxr-xr-x
📄 traceroute6.iputils	18.02 KB	06/28/2019 11:05:23 AM	rwxr-xr-x
📄 trial3	382 bytes	03/22/2022 11:03:56 AM	rwxr-xr-x
📄 troff	719.34 KB	02/10/2018 02:09:07 AM	rwxr-xr-x
📄 truncate	38.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 tset	22 KB	05/23/2018 08:08:27 AM	rwxr-xr-x
📄 tsort	34.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 tty	30.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 turbostat	1.58 KB	11/01/2022 04:52:05 PM	rwxr-xr-x
📄 twist3	382 bytes	03/22/2022 11:03:56 AM	rwxr-xr-x
📄 twistd3	384 bytes	03/22/2022 11:03:56 AM	rwxr-xr-x
📄 tzselect	15.04 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 ua	4.49 KB	03/21/2018 05:20:04 PM	rwxr-xr-x
📄 ubuntu-advantage	4.49 KB	03/21/2018 05:20:04 PM	rwxr-xr-x
📄 ubuntu-bug	2.5 KB	11/11/2019 09:57:56 PM	rwxr-xr-x
📄 ubuntu-core-launcher	127.15 KB	02/23/2022 06:29:05 PM	rwxr-xr-x
📄 ubuntu-support-status	7.84 KB	06/03/2020 06:41:50 PM	rwxr-xr-x
📄 ucf	39.73 KB	02/26/2018 12:58:23 AM	rwxr-xr-x
📄 ucfq	18.91 KB	02/26/2018 12:58:23 AM	rwxr-xr-x
📄 ucfr	10.47 KB	02/26/2018 12:58:23 AM	rwxr-xr-x
📄 ul	14.01 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 unattended-upgrade	82.55 KB	02/17/2020 11:37:03 AM	rwxr-xr-x
📄 unattended-upgrades	82.55 KB	02/17/2020 11:37:03 AM	rwxr-xr-x
📄 unexpand	38.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 unicode_stop	530 bytes	01/22/2018 01:49:48 PM	rwxr-xr-x
📄 uniq	42.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 unlink	30.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 unlzma	74.36 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 unmkinitramfs	2.79 KB	08/12/2020 08:12:11 PM	rwxr-xr-x
📄 unshare	18.27 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 unsquashfs	99.71 KB	09/14/2021 08:43:17 AM	rwxr-xr-x
📄 unxz	74.36 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 update-alternatives	46.01 KB	05/25/2022 11:14:56 AM	rwxr-xr-x
📄 update-mime-database	50.19 KB	10/10/2017 08:56:05 PM	rwxr-xr-x
📄 updatedb	46.08 KB	03/01/2018 04:07:16 PM	rwxr-xr-x
📄 updatedb.mlocate	46.08 KB	03/01/2018 04:07:16 PM	rwxr-xr-x
📄 uptime	10.07 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 usb-devices	4.12 KB	04/21/2017 08:59:17 PM	rwxr-xr-x
📄 usbhid-dump	22.08 KB	04/21/2017 08:59:17 PM	rwxr-xr-x
📄 usbip	1.58 KB	11/01/2022 04:52:05 PM	rwxr-xr-x
📄 usbipd	1.58 KB	11/01/2022 04:52:05 PM	rwxr-xr-x
📄 users	34.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 utmpdump	22.07 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 uuidgen	14.07 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 uuidparse	34.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 vcs-run	6.75 KB	04/13/2018 01:07:55 PM	rwxr-xr-x
📄 vi	2.55 MB	09/13/2022 03:07:18 PM	rwxr-xr-x
📄 view	2.55 MB	09/13/2022 03:07:18 PM	rwxr-xr-x
📄 vigpg	2.58 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 vim	2.55 MB	09/13/2022 03:07:18 PM	rwxr-xr-x
📄 vim.basic	2.55 MB	09/13/2022 03:07:18 PM	rwxr-xr-x
📄 vim.tiny	1.06 MB	09/13/2022 03:07:18 PM	rwxr-xr-x
📄 vimdiff	2.55 MB	09/13/2022 03:07:18 PM	rwxr-xr-x
📄 vimtutor	2.05 KB	09/13/2022 03:07:18 PM	rwxr-xr-x
📄 vmhgfs-fuse	50.48 KB	08/16/2022 01:24:08 PM	rwxr-xr-x
📄 vmstat	34.09 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 vmtoolsd	54.25 KB	08/16/2022 01:24:08 PM	rwxr-xr-x
📄 vmware-checkvm	10.07 KB	08/16/2022 01:24:08 PM	rwxr-xr-x
📄 vmware-hgfsclient	10.07 KB	08/16/2022 01:24:08 PM	rwxr-xr-x
📄 vmware-namespace-cmd	17.99 KB	08/16/2022 01:24:08 PM	rwxr-xr-x
📄 vmware-rpctool	17.99 KB	08/16/2022 01:24:08 PM	rwxr-xr-x
📄 vmware-toolbox-cmd	38.28 KB	08/16/2022 01:24:08 PM	rwxr-xr-x
📄 vmware-vgauth-cmd	13.99 KB	08/16/2022 01:24:08 PM	rwxr-xr-x
📄 vmware-vgauth-smoketest	18.01 KB	08/16/2022 01:24:08 PM	rwxr-xr-x
📄 vmware-vmblock-fuse	18.41 KB	08/16/2022 01:24:08 PM	rwxr-xr-x
📄 vmware-xferlogs	10.07 KB	08/16/2022 01:24:08 PM	rwxr-xr-x
📄 volname	9.99 KB	03/28/2017 04:22:15 AM	rwxr-xr-x
📄 w	18.07 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 w.procps	18.07 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 wall	30.08 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 watch	22.41 KB	08/09/2019 03:37:27 PM	rwxr-xr-x
📄 watchgnupg	13.99 KB	07/04/2022 04:20:59 PM	rwxr-xr-x
📄 wc	42.19 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 wget	487.56 KB	04/08/2019 06:51:50 PM	rwxr-xr-x
📄 whatis	46.98 KB	08/04/2018 07:16:12 PM	rwxr-xr-x
📄 whereis	26.51 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 which	946 bytes	12/30/2017 06:15:02 PM	rwxr-xr-x
📄 who	50.21 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 whoami	30.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 wifi-status	2.06 KB	12/04/2017 01:46:48 PM	rwxr-xr-x
📄 write	13.99 KB	01/17/2018 11:27:24 AM	rwxr-xr-x
📄 www-browser	1.84 MB	02/19/2018 09:15:35 PM	rwxr-xr-x
📄 x86_64	18.34 KB	09/16/2020 06:43:15 PM	rwxr-xr-x
📄 x86_64-linux-gnu-addr2line	30.55 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-ar	58.24 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-as	895.98 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-c++filt	26.12 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-cpp	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-cpp-7	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-dwp	2.75 MB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-elfedit	30.45 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-g++	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-g++-7	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcc	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcc-7	1022.94 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcc-ar	30.47 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcc-ar-7	30.47 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcc-nm	30.47 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcc-nm-7	30.47 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcc-ranlib	30.47 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcc-ranlib-7	30.47 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcov	616.09 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcov-7	616.09 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcov-dump	499.93 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcov-dump-7	499.93 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcov-tool	535.99 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gcov-tool-7	535.99 KB	12/04/2019 02:25:41 PM	rwxr-xr-x
📄 x86_64-linux-gnu-gold	2.97 MB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-gprof	99.73 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-ld	1.7 MB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-ld.bfd	1.7 MB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-ld.gold	2.97 MB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-nm	43.27 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-objcopy	230.2 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-objdump	404.55 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-python3-config	3.21 KB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 x86_64-linux-gnu-python3.6-config	3.21 KB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 x86_64-linux-gnu-python3.6m-config	3.21 KB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 x86_64-linux-gnu-python3m-config	3.21 KB	06/29/2022 11:45:57 AM	rwxr-xr-x
📄 x86_64-linux-gnu-ranlib	58.27 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-readelf	582.46 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-size	30.3 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-strings	30.5 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_64-linux-gnu-strip	230.2 KB	10/20/2021 11:11:39 AM	rwxr-xr-x
📄 x86_energy_perf_policy	1.58 KB	11/01/2022 04:52:05 PM	rwxr-xr-x
📄 xargs	70.21 KB	11/05/2017 05:16:48 PM	rwxr-xr-x
📄 xauth	50.81 KB	11/21/2017 07:47:37 PM	rwxr-xr-x
📄 xdelta3	150.3 KB	12/06/2016 02:04:51 AM	rwxr-xr-x
📄 xdg-user-dir	234 bytes	03/23/2018 03:58:57 PM	rwxr-xr-x
📄 xdg-user-dirs-update	18.07 KB	03/23/2018 03:58:57 PM	rwxr-xr-x
📄 xsubpp	5.04 KB	10/05/2022 10:49:22 AM	rwxr-xr-x
📄 xxd	18.12 KB	09/13/2022 03:07:18 PM	rwxr-xr-x
📄 xz	74.36 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 xzcat	74.36 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 xzcmp	6.48 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 xzdiff	6.48 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 xzegrep	5.76 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 xzfgrep	5.76 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 xzgrep	5.76 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 xzless	1.76 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 xzmore	2.11 KB	04/08/2022 12:56:46 PM	rwxr-xr-x
📄 yes	30.18 KB	01/18/2018 09:43:49 AM	rwxr-xr-x
📄 zdump	18.05 KB	01/24/2022 12:53:44 PM	rwxr-xr-x
📄 zipdetails	47.36 KB	10/05/2022 10:49:22 AM	rwxr-xr-x

Editing: pdb3

#! /usr/bin/python3.6

"""
The Python Debugger Pdb
=======================

To use the debugger in its simplest form:

>>> import pdb
        >>> pdb.run('<a statement>')

The debugger's prompt is '(Pdb) '.  This will stop in the first
function call in <a statement>.

Alternatively, if a statement terminated with an unhandled exception,
you can use pdb's post-mortem facility to inspect the contents of the
traceback:

>>> <a statement>
        <exception traceback>
        >>> import pdb
        >>> pdb.pm()

The commands recognized by the debugger are listed in the next
section.  Most can be abbreviated as indicated; e.g., h(elp) means
that 'help' can be typed as 'h' or 'help' (but not as 'he' or 'hel',
nor as 'H' or 'Help' or 'HELP').  Optional arguments are enclosed in
square brackets.  Alternatives in the command syntax are separated
by a vertical bar (|).

A blank line repeats the previous command literally, except for
'list', where it lists the next 11 lines.

Commands that the debugger doesn't recognize are assumed to be Python
statements and are executed in the context of the program being
debugged.  Python statements can also be prefixed with an exclamation
point ('!').  This is a powerful way to inspect the program being
debugged; it is even possible to change variables or call functions.
When an exception occurs in such a statement, the exception name is
printed but the debugger's state is not changed.

The debugger supports aliases, which can save typing.  And aliases can
have parameters (see the alias help entry) which allows one a certain
level of adaptability to the context under examination.

Multiple commands may be entered on a single line, separated by the
pair ';;'.  No intelligence is applied to separating the commands; the
input is split at the first ';;', even if it is in the middle of a
quoted string.

If a file ".pdbrc" exists in your home directory or in the current
directory, it is read in and executed as if it had been typed at the
debugger prompt.  This is particularly useful for aliases.  If both
files exist, the one in the home directory is read first and aliases
defined there can be overridden by the local file.  This behavior can be
disabled by passing the "readrc=False" argument to the Pdb constructor.

Aside from aliases, the debugger is not directly programmable; but it
is implemented as a class from which you can derive your own debugger
class, which you can make as fancy as you like.

Debugger commands
=================

"""
# NOTE: the actual command documentation is collected from docstrings of the
# commands and is appended to __doc__ after the class has been defined.

import os
import re
import sys
import cmd
import bdb
import dis
import code
import glob
import pprint
import signal
import inspect
import traceback
import linecache

class Restart(Exception):
    """Causes a debugger to be restarted for the debugged python program."""
    pass

__all__ = ["run", "pm", "Pdb", "runeval", "runctx", "runcall", "set_trace",
           "post_mortem", "help"]

def find_function(funcname, filename):
    cre = re.compile(r'def\s+%s\s*[(]' % re.escape(funcname))
    try:
        fp = open(filename)
    except OSError:
        return None
    # consumer of this info expects the first line to be 1
    with fp:
        for lineno, line in enumerate(fp, start=1):
            if cre.match(line):
                return funcname, filename, lineno
    return None

def getsourcelines(obj):
    lines, lineno = inspect.findsource(obj)
    if inspect.isframe(obj) and obj.f_globals is obj.f_locals:
        # must be a module frame: do not try to cut a block out of it
        return lines, 1
    elif inspect.ismodule(obj):
        return lines, 1
    return inspect.getblock(lines[lineno:]), lineno+1

def lasti2lineno(code, lasti):
    linestarts = list(dis.findlinestarts(code))
    linestarts.reverse()
    for i, lineno in linestarts:
        if lasti >= i:
            return lineno
    return 0

class _rstr(str):
    """String that doesn't quote its repr."""
    def __repr__(self):
        return self

# Interaction prompt line will separate file and call info from code
# text using value of line_prefix string.  A newline and arrow may
# be to your liking.  You can set it once pdb is imported using the
# command "pdb.line_prefix = '\n% '".
# line_prefix = ': '    # Use this to get the old situation back
line_prefix = '\n-> '   # Probably a better default

class Pdb(bdb.Bdb, cmd.Cmd):

_previous_sigint_handler = None

def __init__(self, completekey='tab', stdin=None, stdout=None, skip=None,
                 nosigint=False, readrc=True):
        bdb.Bdb.__init__(self, skip=skip)
        cmd.Cmd.__init__(self, completekey, stdin, stdout)
        if stdout:
            self.use_rawinput = 0
        self.prompt = '(Pdb) '
        self.aliases = {}
        self.displaying = {}
        self.mainpyfile = ''
        self._wait_for_mainpyfile = False
        self.tb_lineno = {}
        # Try to load readline if it exists
        try:
            import readline
            # remove some common file name delimiters
            readline.set_completer_delims(' \t\n`@#$%^&*()=+[{]}\\|;:\'",<>?')
        except ImportError:
            pass
        self.allow_kbdint = False
        self.nosigint = nosigint

# Read $HOME/.pdbrc and ./.pdbrc
        self.rcLines = []
        if readrc:
            if 'HOME' in os.environ:
                envHome = os.environ['HOME']
                try:
                    with open(os.path.join(envHome, ".pdbrc")) as rcFile:
                        self.rcLines.extend(rcFile)
                except OSError:
                    pass
            try:
                with open(".pdbrc") as rcFile:
                    self.rcLines.extend(rcFile)
            except OSError:
                pass

self.commands = {} # associates a command list to breakpoint numbers
        self.commands_doprompt = {} # for each bp num, tells if the prompt
                                    # must be disp. after execing the cmd list
        self.commands_silent = {} # for each bp num, tells if the stack trace
                                  # must be disp. after execing the cmd list
        self.commands_defining = False # True while in the process of defining
                                       # a command list
        self.commands_bnum = None # The breakpoint number for which we are
                                  # defining a list

def sigint_handler(self, signum, frame):
        if self.allow_kbdint:
            raise KeyboardInterrupt
        self.message("\nProgram interrupted. (Use 'cont' to resume).")
        self.set_step()
        self.set_trace(frame)

def reset(self):
        bdb.Bdb.reset(self)
        self.forget()

def forget(self):
        self.lineno = None
        self.stack = []
        self.curindex = 0
        self.curframe = None
        self.tb_lineno.clear()

def setup(self, f, tb):
        self.forget()
        self.stack, self.curindex = self.get_stack(f, tb)
        while tb:
            # when setting up post-mortem debugging with a traceback, save all
            # the original line numbers to be displayed along the current line
            # numbers (which can be different, e.g. due to finally clauses)
            lineno = lasti2lineno(tb.tb_frame.f_code, tb.tb_lasti)
            self.tb_lineno[tb.tb_frame] = lineno
            tb = tb.tb_next
        self.curframe = self.stack[self.curindex][0]
        # The f_locals dictionary is updated from the actual frame
        # locals whenever the .f_locals accessor is called, so we
        # cache it here to ensure that modifications are not overwritten.
        self.curframe_locals = self.curframe.f_locals
        return self.execRcLines()

# Can be executed earlier than 'setup' if desired
    def execRcLines(self):
        if not self.rcLines:
            return
        # local copy because of recursion
        rcLines = self.rcLines
        rcLines.reverse()
        # execute every line only once
        self.rcLines = []
        while rcLines:
            line = rcLines.pop().strip()
            if line and line[0] != '#':
                if self.onecmd(line):
                    # if onecmd returns True, the command wants to exit
                    # from the interaction, save leftover rc lines
                    # to execute before next interaction
                    self.rcLines += reversed(rcLines)
                    return True

# Override Bdb methods

def user_call(self, frame, argument_list):
        """This method is called when there is the remote possibility
        that we ever need to stop in this function."""
        if self._wait_for_mainpyfile:
            return
        if self.stop_here(frame):
            self.message('--Call--')
            self.interaction(frame, None)

def user_line(self, frame):
        """This function is called when we stop or break at this line."""
        if self._wait_for_mainpyfile:
            if (self.mainpyfile != self.canonic(frame.f_code.co_filename)
                or frame.f_lineno <= 0):
                return
            self._wait_for_mainpyfile = False
        if self.bp_commands(frame):
            self.interaction(frame, None)

def bp_commands(self, frame):
        """Call every command that was set for the current active breakpoint
        (if there is one).

Returns True if the normal interaction function must be called,
        False otherwise."""
        # self.currentbp is set in bdb in Bdb.break_here if a breakpoint was hit
        if getattr(self, "currentbp", False) and \
               self.currentbp in self.commands:
            currentbp = self.currentbp
            self.currentbp = 0
            lastcmd_back = self.lastcmd
            self.setup(frame, None)
            for line in self.commands[currentbp]:
                self.onecmd(line)
            self.lastcmd = lastcmd_back
            if not self.commands_silent[currentbp]:
                self.print_stack_entry(self.stack[self.curindex])
            if self.commands_doprompt[currentbp]:
                self._cmdloop()
            self.forget()
            return
        return 1

def user_return(self, frame, return_value):
        """This function is called when a return trap is set here."""
        if self._wait_for_mainpyfile:
            return
        frame.f_locals['__return__'] = return_value
        self.message('--Return--')
        self.interaction(frame, None)

def user_exception(self, frame, exc_info):
        """This function is called if an exception occurs,
        but only if we are to stop at or just below this level."""
        if self._wait_for_mainpyfile:
            return
        exc_type, exc_value, exc_traceback = exc_info
        frame.f_locals['__exception__'] = exc_type, exc_value

# An 'Internal StopIteration' exception is an exception debug event
        # issued by the interpreter when handling a subgenerator run with
        # 'yield from' or a generator controlled by a for loop. No exception has
        # actually occurred in this case. The debugger uses this debug event to
        # stop when the debuggee is returning from such generators.
        prefix = 'Internal ' if (not exc_traceback
                                    and exc_type is StopIteration) else ''
        self.message('%s%s' % (prefix,
            traceback.format_exception_only(exc_type, exc_value)[-1].strip()))
        self.interaction(frame, exc_traceback)

# General interaction function
    def _cmdloop(self):
        while True:
            try:
                # keyboard interrupts allow for an easy way to cancel
                # the current command, so allow them during interactive input
                self.allow_kbdint = True
                self.cmdloop()
                self.allow_kbdint = False
                break
            except KeyboardInterrupt:
                self.message('--KeyboardInterrupt--')

# Called before loop, handles display expressions
    def preloop(self):
        displaying = self.displaying.get(self.curframe)
        if displaying:
            for expr, oldvalue in displaying.items():
                newvalue = self._getval_except(expr)
                # check for identity first; this prevents custom __eq__ to
                # be called at every loop, and also prevents instances whose
                # fields are changed to be displayed
                if newvalue is not oldvalue and newvalue != oldvalue:
                    displaying[expr] = newvalue
                    self.message('display %s: %r  [old: %r]' %
                                 (expr, newvalue, oldvalue))

def interaction(self, frame, traceback):
        # Restore the previous signal handler at the Pdb prompt.
        if Pdb._previous_sigint_handler:
            signal.signal(signal.SIGINT, Pdb._previous_sigint_handler)
            Pdb._previous_sigint_handler = None
        if self.setup(frame, traceback):
            # no interaction desired at this time (happens if .pdbrc contains
            # a command like "continue")
            self.forget()
            return
        self.print_stack_entry(self.stack[self.curindex])
        self._cmdloop()
        self.forget()

def displayhook(self, obj):
        """Custom displayhook for the exec in default(), which prevents
        assignment of the _ variable in the builtins.
        """
        # reproduce the behavior of the standard displayhook, not printing None
        if obj is not None:
            self.message(repr(obj))

def default(self, line):
        if line[:1] == '!': line = line[1:]
        locals = self.curframe_locals
        globals = self.curframe.f_globals
        try:
            code = compile(line + '\n', '<stdin>', 'single')
            save_stdout = sys.stdout
            save_stdin = sys.stdin
            save_displayhook = sys.displayhook
            try:
                sys.stdin = self.stdin
                sys.stdout = self.stdout
                sys.displayhook = self.displayhook
                exec(code, globals, locals)
            finally:
                sys.stdout = save_stdout
                sys.stdin = save_stdin
                sys.displayhook = save_displayhook
        except:
            exc_info = sys.exc_info()[:2]
            self.error(traceback.format_exception_only(*exc_info)[-1].strip())

def precmd(self, line):
        """Handle alias expansion and ';;' separator."""
        if not line.strip():
            return line
        args = line.split()
        while args[0] in self.aliases:
            line = self.aliases[args[0]]
            ii = 1
            for tmpArg in args[1:]:
                line = line.replace("%" + str(ii),
                                      tmpArg)
                ii += 1
            line = line.replace("%*", ' '.join(args[1:]))
            args = line.split()
        # split into ';;' separated commands
        # unless it's an alias command
        if args[0] != 'alias':
            marker = line.find(';;')
            if marker >= 0:
                # queue up everything after marker
                next = line[marker+2:].lstrip()
                self.cmdqueue.append(next)
                line = line[:marker].rstrip()
        return line

def onecmd(self, line):
        """Interpret the argument as though it had been typed in response
        to the prompt.

Checks whether this line is typed at the normal prompt or in
        a breakpoint command list definition.
        """
        if not self.commands_defining:
            return cmd.Cmd.onecmd(self, line)
        else:
            return self.handle_command_def(line)

def handle_command_def(self, line):
        """Handles one command line during command list definition."""
        cmd, arg, line = self.parseline(line)
        if not cmd:
            return
        if cmd == 'silent':
            self.commands_silent[self.commands_bnum] = True
            return # continue to handle other cmd def in the cmd list
        elif cmd == 'end':
            self.cmdqueue = []
            return 1 # end of cmd list
        cmdlist = self.commands[self.commands_bnum]
        if arg:
            cmdlist.append(cmd+' '+arg)
        else:
            cmdlist.append(cmd)
        # Determine if we must stop
        try:
            func = getattr(self, 'do_' + cmd)
        except AttributeError:
            func = self.default
        # one of the resuming commands
        if func.__name__ in self.commands_resuming:
            self.commands_doprompt[self.commands_bnum] = False
            self.cmdqueue = []
            return 1
        return

# interface abstraction functions

def message(self, msg):
        print(msg, file=self.stdout)

def error(self, msg):
        print('***', msg, file=self.stdout)

# Generic completion functions.  Individual complete_foo methods can be
    # assigned below to one of these functions.

def _complete_location(self, text, line, begidx, endidx):
        # Complete a file/module/function location for break/tbreak/clear.
        if line.strip().endswith((':', ',')):
            # Here comes a line number or a condition which we can't complete.
            return []
        # First, try to find matching functions (i.e. expressions).
        try:
            ret = self._complete_expression(text, line, begidx, endidx)
        except Exception:
            ret = []
        # Then, try to complete file names as well.
        globs = glob.glob(text + '*')
        for fn in globs:
            if os.path.isdir(fn):
                ret.append(fn + '/')
            elif os.path.isfile(fn) and fn.lower().endswith(('.py', '.pyw')):
                ret.append(fn + ':')
        return ret

def _complete_bpnumber(self, text, line, begidx, endidx):
        # Complete a breakpoint number.  (This would be more helpful if we could
        # display additional info along with the completions, such as file/line
        # of the breakpoint.)
        return [str(i) for i, bp in enumerate(bdb.Breakpoint.bpbynumber)
                if bp is not None and str(i).startswith(text)]

def _complete_expression(self, text, line, begidx, endidx):
        # Complete an arbitrary expression.
        if not self.curframe:
            return []
        # Collect globals and locals.  It is usually not really sensible to also
        # complete builtins, and they clutter the namespace quite heavily, so we
        # leave them out.
        ns = self.curframe.f_globals.copy()
        ns.update(self.curframe_locals)
        if '.' in text:
            # Walk an attribute chain up to the last part, similar to what
            # rlcompleter does.  This will bail if any of the parts are not
            # simple attribute access, which is what we want.
            dotted = text.split('.')
            try:
                obj = ns[dotted[0]]
                for part in dotted[1:-1]:
                    obj = getattr(obj, part)
            except (KeyError, AttributeError):
                return []
            prefix = '.'.join(dotted[:-1]) + '.'
            return [prefix + n for n in dir(obj) if n.startswith(dotted[-1])]
        else:
            # Complete a simple name.
            return [n for n in ns.keys() if n.startswith(text)]

# Command definitions, called by cmdloop()
    # The argument is the remaining string on the command line
    # Return true to exit from the command loop

def do_commands(self, arg):
        """commands [bpnumber]
        (com) ...
        (com) end
        (Pdb)

Specify a list of commands for breakpoint number bpnumber.
        The commands themselves are entered on the following lines.
        Type a line containing just 'end' to terminate the commands.
        The commands are executed when the breakpoint is hit.

To remove all commands from a breakpoint, type commands and
        follow it immediately with end; that is, give no commands.

With no bpnumber argument, commands refers to the last
        breakpoint set.

You can use breakpoint commands to start your program up
        again.  Simply use the continue command, or step, or any other
        command that resumes execution.

Specifying any command resuming execution (currently continue,
        step, next, return, jump, quit and their abbreviations)
        terminates the command list (as if that command was
        immediately followed by end).  This is because any time you
        resume execution (even with a simple next or step), you may
        encounter another breakpoint -- which could have its own
        command list, leading to ambiguities about which list to
        execute.

If you use the 'silent' command in the command list, the usual
        message about stopping at a breakpoint is not printed.  This
        may be desirable for breakpoints that are to print a specific
        message and then continue.  If none of the other commands
        print anything, you will see no sign that the breakpoint was
        reached.
        """
        if not arg:
            bnum = len(bdb.Breakpoint.bpbynumber) - 1
        else:
            try:
                bnum = int(arg)
            except:
                self.error("Usage: commands [bnum]\n        ...\n        end")
                return
        self.commands_bnum = bnum
        # Save old definitions for the case of a keyboard interrupt.
        if bnum in self.commands:
            old_command_defs = (self.commands[bnum],
                                self.commands_doprompt[bnum],
                                self.commands_silent[bnum])
        else:
            old_command_defs = None
        self.commands[bnum] = []
        self.commands_doprompt[bnum] = True
        self.commands_silent[bnum] = False

prompt_back = self.prompt
        self.prompt = '(com) '
        self.commands_defining = True
        try:
            self.cmdloop()
        except KeyboardInterrupt:
            # Restore old definitions.
            if old_command_defs:
                self.commands[bnum] = old_command_defs[0]
                self.commands_doprompt[bnum] = old_command_defs[1]
                self.commands_silent[bnum] = old_command_defs[2]
            else:
                del self.commands[bnum]
                del self.commands_doprompt[bnum]
                del self.commands_silent[bnum]
            self.error('command definition aborted, old commands restored')
        finally:
            self.commands_defining = False
            self.prompt = prompt_back

complete_commands = _complete_bpnumber

def do_break(self, arg, temporary = 0):
        """b(reak) [ ([filename:]lineno | function) [, condition] ]
        Without argument, list all breaks.

With a line number argument, set a break at this line in the
        current file.  With a function name, set a break at the first
        executable line of that function.  If a second argument is
        present, it is a string specifying an expression which must
        evaluate to true before the breakpoint is honored.

The line number may be prefixed with a filename and a colon,
        to specify a breakpoint in another file (probably one that
        hasn't been loaded yet).  The file is searched for on
        sys.path; the .py suffix may be omitted.
        """
        if not arg:
            if self.breaks:  # There's at least one
                self.message("Num Type         Disp Enb   Where")
                for bp in bdb.Breakpoint.bpbynumber:
                    if bp:
                        self.message(bp.bpformat())
            return
        # parse arguments; comma has lowest precedence
        # and cannot occur in filename
        filename = None
        lineno = None
        cond = None
        comma = arg.find(',')
        if comma > 0:
            # parse stuff after comma: "condition"
            cond = arg[comma+1:].lstrip()
            arg = arg[:comma].rstrip()
        # parse stuff before comma: [filename:]lineno | function
        colon = arg.rfind(':')
        funcname = None
        if colon >= 0:
            filename = arg[:colon].rstrip()
            f = self.lookupmodule(filename)
            if not f:
                self.error('%r not found from sys.path' % filename)
                return
            else:
                filename = f
            arg = arg[colon+1:].lstrip()
            try:
                lineno = int(arg)
            except ValueError:
                self.error('Bad lineno: %s' % arg)
                return
        else:
            # no colon; can be lineno or function
            try:
                lineno = int(arg)
            except ValueError:
                try:
                    func = eval(arg,
                                self.curframe.f_globals,
                                self.curframe_locals)
                except:
                    func = arg
                try:
                    if hasattr(func, '__func__'):
                        func = func.__func__
                    code = func.__code__
                    #use co_name to identify the bkpt (function names
                    #could be aliased, but co_name is invariant)
                    funcname = code.co_name
                    lineno = code.co_firstlineno
                    filename = code.co_filename
                except:
                    # last thing to try
                    (ok, filename, ln) = self.lineinfo(arg)
                    if not ok:
                        self.error('The specified object %r is not a function '
                                   'or was not found along sys.path.' % arg)
                        return
                    funcname = ok # ok contains a function name
                    lineno = int(ln)
        if not filename:
            filename = self.defaultFile()
        # Check for reasonable breakpoint
        line = self.checkline(filename, lineno)
        if line:
            # now set the break point
            err = self.set_break(filename, line, temporary, cond, funcname)
            if err:
                self.error(err)
            else:
                bp = self.get_breaks(filename, line)[-1]
                self.message("Breakpoint %d at %s:%d" %
                             (bp.number, bp.file, bp.line))

# To be overridden in derived debuggers
    def defaultFile(self):
        """Produce a reasonable default."""
        filename = self.curframe.f_code.co_filename
        if filename == '<string>' and self.mainpyfile:
            filename = self.mainpyfile
        return filename

do_b = do_break

complete_break = _complete_location
    complete_b = _complete_location

def do_tbreak(self, arg):
        """tbreak [ ([filename:]lineno | function) [, condition] ]
        Same arguments as break, but sets a temporary breakpoint: it
        is automatically deleted when first hit.
        """
        self.do_break(arg, 1)

complete_tbreak = _complete_location

def lineinfo(self, identifier):
        failed = (None, None, None)
        # Input is identifier, may be in single quotes
        idstring = identifier.split("'")
        if len(idstring) == 1:
            # not in single quotes
            id = idstring[0].strip()
        elif len(idstring) == 3:
            # quoted
            id = idstring[1].strip()
        else:
            return failed
        if id == '': return failed
        parts = id.split('.')
        # Protection for derived debuggers
        if parts[0] == 'self':
            del parts[0]
            if len(parts) == 0:
                return failed
        # Best first guess at file to look at
        fname = self.defaultFile()
        if len(parts) == 1:
            item = parts[0]
        else:
            # More than one part.
            # First is module, second is method/class
            f = self.lookupmodule(parts[0])
            if f:
                fname = f
            item = parts[1]
        answer = find_function(item, fname)
        return answer or failed

def checkline(self, filename, lineno):
        """Check whether specified line seems to be executable.

Return `lineno` if it is, 0 if not (e.g. a docstring, comment, blank
        line or EOF). Warning: testing is not comprehensive.
        """
        # this method should be callable before starting debugging, so default
        # to "no globals" if there is no current frame
        globs = self.curframe.f_globals if hasattr(self, 'curframe') else None
        line = linecache.getline(filename, lineno, globs)
        if not line:
            self.message('End of file')
            return 0
        line = line.strip()
        # Don't allow setting breakpoint at a blank line
        if (not line or (line[0] == '#') or
             (line[:3] == '"""') or line[:3] == "'''"):
            self.error('Blank or comment')
            return 0
        return lineno

def do_enable(self, arg):
        """enable bpnumber [bpnumber ...]
        Enables the breakpoints given as a space separated list of
        breakpoint numbers.
        """
        args = arg.split()
        for i in args:
            try:
                bp = self.get_bpbynumber(i)
            except ValueError as err:
                self.error(err)
            else:
                bp.enable()
                self.message('Enabled %s' % bp)

complete_enable = _complete_bpnumber

def do_disable(self, arg):
        """disable bpnumber [bpnumber ...]
        Disables the breakpoints given as a space separated list of
        breakpoint numbers.  Disabling a breakpoint means it cannot
        cause the program to stop execution, but unlike clearing a
        breakpoint, it remains in the list of breakpoints and can be
        (re-)enabled.
        """
        args = arg.split()
        for i in args:
            try:
                bp = self.get_bpbynumber(i)
            except ValueError as err:
                self.error(err)
            else:
                bp.disable()
                self.message('Disabled %s' % bp)

complete_disable = _complete_bpnumber

def do_condition(self, arg):
        """condition bpnumber [condition]
        Set a new condition for the breakpoint, an expression which
        must evaluate to true before the breakpoint is honored.  If
        condition is absent, any existing condition is removed; i.e.,
        the breakpoint is made unconditional.
        """
        args = arg.split(' ', 1)
        try:
            cond = args[1]
        except IndexError:
            cond = None
        try:
            bp = self.get_bpbynumber(args[0].strip())
        except IndexError:
            self.error('Breakpoint number expected')
        except ValueError as err:
            self.error(err)
        else:
            bp.cond = cond
            if not cond:
                self.message('Breakpoint %d is now unconditional.' % bp.number)
            else:
                self.message('New condition set for breakpoint %d.' % bp.number)

complete_condition = _complete_bpnumber

def do_ignore(self, arg):
        """ignore bpnumber [count]
        Set the ignore count for the given breakpoint number.  If
        count is omitted, the ignore count is set to 0.  A breakpoint
        becomes active when the ignore count is zero.  When non-zero,
        the count is decremented each time the breakpoint is reached
        and the breakpoint is not disabled and any associated
        condition evaluates to true.
        """
        args = arg.split()
        try:
            count = int(args[1].strip())
        except:
            count = 0
        try:
            bp = self.get_bpbynumber(args[0].strip())
        except IndexError:
            self.error('Breakpoint number expected')
        except ValueError as err:
            self.error(err)
        else:
            bp.ignore = count
            if count > 0:
                if count > 1:
                    countstr = '%d crossings' % count
                else:
                    countstr = '1 crossing'
                self.message('Will ignore next %s of breakpoint %d.' %
                             (countstr, bp.number))
            else:
                self.message('Will stop next time breakpoint %d is reached.'
                             % bp.number)

complete_ignore = _complete_bpnumber

def do_clear(self, arg):
        """cl(ear) filename:lineno\ncl(ear) [bpnumber [bpnumber...]]
        With a space separated list of breakpoint numbers, clear
        those breakpoints.  Without argument, clear all breaks (but
        first ask confirmation).  With a filename:lineno argument,
        clear all breaks at that line in that file.
        """
        if not arg:
            try:
                reply = input('Clear all breaks? ')
            except EOFError:
                reply = 'no'
            reply = reply.strip().lower()
            if reply in ('y', 'yes'):
                bplist = [bp for bp in bdb.Breakpoint.bpbynumber if bp]
                self.clear_all_breaks()
                for bp in bplist:
                    self.message('Deleted %s' % bp)
            return
        if ':' in arg:
            # Make sure it works for "clear C:\foo\bar.py:12"
            i = arg.rfind(':')
            filename = arg[:i]
            arg = arg[i+1:]
            try:
                lineno = int(arg)
            except ValueError:
                err = "Invalid line number (%s)" % arg
            else:
                bplist = self.get_breaks(filename, lineno)
                err = self.clear_break(filename, lineno)
            if err:
                self.error(err)
            else:
                for bp in bplist:
                    self.message('Deleted %s' % bp)
            return
        numberlist = arg.split()
        for i in numberlist:
            try:
                bp = self.get_bpbynumber(i)
            except ValueError as err:
                self.error(err)
            else:
                self.clear_bpbynumber(i)
                self.message('Deleted %s' % bp)
    do_cl = do_clear # 'c' is already an abbreviation for 'continue'

complete_clear = _complete_location
    complete_cl = _complete_location

def do_where(self, arg):
        """w(here)
        Print a stack trace, with the most recent frame at the bottom.
        An arrow indicates the "current frame", which determines the
        context of most commands.  'bt' is an alias for this command.
        """
        self.print_stack_trace()
    do_w = do_where
    do_bt = do_where

def _select_frame(self, number):
        assert 0 <= number < len(self.stack)
        self.curindex = number
        self.curframe = self.stack[self.curindex][0]
        self.curframe_locals = self.curframe.f_locals
        self.print_stack_entry(self.stack[self.curindex])
        self.lineno = None

def do_up(self, arg):
        """u(p) [count]
        Move the current frame count (default one) levels up in the
        stack trace (to an older frame).
        """
        if self.curindex == 0:
            self.error('Oldest frame')
            return
        try:
            count = int(arg or 1)
        except ValueError:
            self.error('Invalid frame count (%s)' % arg)
            return
        if count < 0:
            newframe = 0
        else:
            newframe = max(0, self.curindex - count)
        self._select_frame(newframe)
    do_u = do_up

def do_down(self, arg):
        """d(own) [count]
        Move the current frame count (default one) levels down in the
        stack trace (to a newer frame).
        """
        if self.curindex + 1 == len(self.stack):
            self.error('Newest frame')
            return
        try:
            count = int(arg or 1)
        except ValueError:
            self.error('Invalid frame count (%s)' % arg)
            return
        if count < 0:
            newframe = len(self.stack) - 1
        else:
            newframe = min(len(self.stack) - 1, self.curindex + count)
        self._select_frame(newframe)
    do_d = do_down

def do_until(self, arg):
        """unt(il) [lineno]
        Without argument, continue execution until the line with a
        number greater than the current one is reached.  With a line
        number, continue execution until a line with a number greater
        or equal to that is reached.  In both cases, also stop when
        the current frame returns.
        """
        if arg:
            try:
                lineno = int(arg)
            except ValueError:
                self.error('Error in argument: %r' % arg)
                return
            if lineno <= self.curframe.f_lineno:
                self.error('"until" line number is smaller than current '
                           'line number')
                return
        else:
            lineno = None
        self.set_until(self.curframe, lineno)
        return 1
    do_unt = do_until

def do_step(self, arg):
        """s(tep)
        Execute the current line, stop at the first possible occasion
        (either in a function that is called or in the current
        function).
        """
        self.set_step()
        return 1
    do_s = do_step

def do_next(self, arg):
        """n(ext)
        Continue execution until the next line in the current function
        is reached or it returns.
        """
        self.set_next(self.curframe)
        return 1
    do_n = do_next

def do_run(self, arg):
        """run [args...]
        Restart the debugged python program. If a string is supplied
        it is split with "shlex", and the result is used as the new
        sys.argv.  History, breakpoints, actions and debugger options
        are preserved.  "restart" is an alias for "run".
        """
        if arg:
            import shlex
            argv0 = sys.argv[0:1]
            sys.argv = shlex.split(arg)
            sys.argv[:0] = argv0
        # this is caught in the main debugger loop
        raise Restart

do_restart = do_run

def do_return(self, arg):
        """r(eturn)
        Continue execution until the current function returns.
        """
        self.set_return(self.curframe)
        return 1
    do_r = do_return

def do_continue(self, arg):
        """c(ont(inue))
        Continue execution, only stop when a breakpoint is encountered.
        """
        if not self.nosigint:
            try:
                Pdb._previous_sigint_handler = \
                    signal.signal(signal.SIGINT, self.sigint_handler)
            except ValueError:
                # ValueError happens when do_continue() is invoked from
                # a non-main thread in which case we just continue without
                # SIGINT set. Would printing a message here (once) make
                # sense?
                pass
        self.set_continue()
        return 1
    do_c = do_cont = do_continue

def do_jump(self, arg):
        """j(ump) lineno
        Set the next line that will be executed.  Only available in
        the bottom-most frame.  This lets you jump back and execute
        code again, or jump forward to skip code that you don't want
        to run.

It should be noted that not all jumps are allowed -- for
        instance it is not possible to jump into the middle of a
        for loop or out of a finally clause.
        """
        if self.curindex + 1 != len(self.stack):
            self.error('You can only jump within the bottom frame')
            return
        try:
            arg = int(arg)
        except ValueError:
            self.error("The 'jump' command requires a line number")
        else:
            try:
                # Do the jump, fix up our copy of the stack, and display the
                # new position
                self.curframe.f_lineno = arg
                self.stack[self.curindex] = self.stack[self.curindex][0], arg
                self.print_stack_entry(self.stack[self.curindex])
            except ValueError as e:
                self.error('Jump failed: %s' % e)
    do_j = do_jump

def do_debug(self, arg):
        """debug code
        Enter a recursive debugger that steps through the code
        argument (which is an arbitrary expression or statement to be
        executed in the current environment).
        """
        sys.settrace(None)
        globals = self.curframe.f_globals
        locals = self.curframe_locals
        p = Pdb(self.completekey, self.stdin, self.stdout)
        p.prompt = "(%s) " % self.prompt.strip()
        self.message("ENTERING RECURSIVE DEBUGGER")
        sys.call_tracing(p.run, (arg, globals, locals))
        self.message("LEAVING RECURSIVE DEBUGGER")
        sys.settrace(self.trace_dispatch)
        self.lastcmd = p.lastcmd

complete_debug = _complete_expression

def do_quit(self, arg):
        """q(uit)\nexit
        Quit from the debugger. The program being executed is aborted.
        """
        self._user_requested_quit = True
        self.set_quit()
        return 1

do_q = do_quit
    do_exit = do_quit

def do_EOF(self, arg):
        """EOF
        Handles the receipt of EOF as a command.
        """
        self.message('')
        self._user_requested_quit = True
        self.set_quit()
        return 1

def do_args(self, arg):
        """a(rgs)
        Print the argument list of the current function.
        """
        co = self.curframe.f_code
        dict = self.curframe_locals
        n = co.co_argcount
        if co.co_flags & 4: n = n+1
        if co.co_flags & 8: n = n+1
        for i in range(n):
            name = co.co_varnames[i]
            if name in dict:
                self.message('%s = %r' % (name, dict[name]))
            else:
                self.message('%s = *** undefined ***' % (name,))
    do_a = do_args

def do_retval(self, arg):
        """retval
        Print the return value for the last return of a function.
        """
        if '__return__' in self.curframe_locals:
            self.message(repr(self.curframe_locals['__return__']))
        else:
            self.error('Not yet returned!')
    do_rv = do_retval

def _getval(self, arg):
        try:
            return eval(arg, self.curframe.f_globals, self.curframe_locals)
        except:
            exc_info = sys.exc_info()[:2]
            self.error(traceback.format_exception_only(*exc_info)[-1].strip())
            raise

def _getval_except(self, arg, frame=None):
        try:
            if frame is None:
                return eval(arg, self.curframe.f_globals, self.curframe_locals)
            else:
                return eval(arg, frame.f_globals, frame.f_locals)
        except:
            exc_info = sys.exc_info()[:2]
            err = traceback.format_exception_only(*exc_info)[-1].strip()
            return _rstr('** raised %s **' % err)

def do_p(self, arg):
        """p expression
        Print the value of the expression.
        """
        try:
            self.message(repr(self._getval(arg)))
        except:
            pass

def do_pp(self, arg):
        """pp expression
        Pretty-print the value of the expression.
        """
        try:
            self.message(pprint.pformat(self._getval(arg)))
        except:
            pass

complete_print = _complete_expression
    complete_p = _complete_expression
    complete_pp = _complete_expression

def do_list(self, arg):
        """l(ist) [first [,last] | .]

List source code for the current file.  Without arguments,
        list 11 lines around the current line or continue the previous
        listing.  With . as argument, list 11 lines around the current
        line.  With one argument, list 11 lines starting at that line.
        With two arguments, list the given range; if the second
        argument is less than the first, it is a count.

The current line in the current frame is indicated by "->".
        If an exception is being debugged, the line where the
        exception was originally raised or propagated is indicated by
        ">>", if it differs from the current line.
        """
        self.lastcmd = 'list'
        last = None
        if arg and arg != '.':
            try:
                if ',' in arg:
                    first, last = arg.split(',')
                    first = int(first.strip())
                    last = int(last.strip())
                    if last < first:
                        # assume it's a count
                        last = first + last
                else:
                    first = int(arg.strip())
                    first = max(1, first - 5)
            except ValueError:
                self.error('Error in argument: %r' % arg)
                return
        elif self.lineno is None or arg == '.':
            first = max(1, self.curframe.f_lineno - 5)
        else:
            first = self.lineno + 1
        if last is None:
            last = first + 10
        filename = self.curframe.f_code.co_filename
        breaklist = self.get_file_breaks(filename)
        try:
            lines = linecache.getlines(filename, self.curframe.f_globals)
            self._print_lines(lines[first-1:last], first, breaklist,
                              self.curframe)
            self.lineno = min(last, len(lines))
            if len(lines) < last:
                self.message('[EOF]')
        except KeyboardInterrupt:
            pass
    do_l = do_list

def do_longlist(self, arg):
        """longlist | ll
        List the whole source code for the current function or frame.
        """
        filename = self.curframe.f_code.co_filename
        breaklist = self.get_file_breaks(filename)
        try:
            lines, lineno = getsourcelines(self.curframe)
        except OSError as err:
            self.error(err)
            return
        self._print_lines(lines, lineno, breaklist, self.curframe)
    do_ll = do_longlist

def do_source(self, arg):
        """source expression
        Try to get source code for the given object and display it.
        """
        try:
            obj = self._getval(arg)
        except:
            return
        try:
            lines, lineno = getsourcelines(obj)
        except (OSError, TypeError) as err:
            self.error(err)
            return
        self._print_lines(lines, lineno)

complete_source = _complete_expression

def _print_lines(self, lines, start, breaks=(), frame=None):
        """Print a range of lines."""
        if frame:
            current_lineno = frame.f_lineno
            exc_lineno = self.tb_lineno.get(frame, -1)
        else:
            current_lineno = exc_lineno = -1
        for lineno, line in enumerate(lines, start):
            s = str(lineno).rjust(3)
            if len(s) < 4:
                s += ' '
            if lineno in breaks:
                s += 'B'
            else:
                s += ' '
            if lineno == current_lineno:
                s += '->'
            elif lineno == exc_lineno:
                s += '>>'
            self.message(s + '\t' + line.rstrip())

def do_whatis(self, arg):
        """whatis arg
        Print the type of the argument.
        """
        try:
            value = self._getval(arg)
        except:
            # _getval() already printed the error
            return
        code = None
        # Is it a function?
        try:
            code = value.__code__
        except Exception:
            pass
        if code:
            self.message('Function %s' % code.co_name)
            return
        # Is it an instance method?
        try:
            code = value.__func__.__code__
        except Exception:
            pass
        if code:
            self.message('Method %s' % code.co_name)
            return
        # Is it a class?
        if value.__class__ is type:
            self.message('Class %s.%s' % (value.__module__, value.__qualname__))
            return
        # None of the above...
        self.message(type(value))

complete_whatis = _complete_expression

def do_display(self, arg):
        """display [expression]

Display the value of the expression if it changed, each time execution
        stops in the current frame.

Without expression, list all display expressions for the current frame.
        """
        if not arg:
            self.message('Currently displaying:')
            for item in self.displaying.get(self.curframe, {}).items():
                self.message('%s: %r' % item)
        else:
            val = self._getval_except(arg)
            self.displaying.setdefault(self.curframe, {})[arg] = val
            self.message('display %s: %r' % (arg, val))

complete_display = _complete_expression

def do_undisplay(self, arg):
        """undisplay [expression]

Do not display the expression any more in the current frame.

Without expression, clear all display expressions for the current frame.
        """
        if arg:
            try:
                del self.displaying.get(self.curframe, {})[arg]
            except KeyError:
                self.error('not displaying %s' % arg)
        else:
            self.displaying.pop(self.curframe, None)

def complete_undisplay(self, text, line, begidx, endidx):
        return [e for e in self.displaying.get(self.curframe, {})
                if e.startswith(text)]

def do_interact(self, arg):
        """interact

Start an interactive interpreter whose global namespace
        contains all the (global and local) names found in the current scope.
        """
        ns = self.curframe.f_globals.copy()
        ns.update(self.curframe_locals)
        code.interact("*interactive*", local=ns)

def do_alias(self, arg):
        """alias [name [command [parameter parameter ...] ]]
        Create an alias called 'name' that executes 'command'.  The
        command must *not* be enclosed in quotes.  Replaceable
        parameters can be indicated by %1, %2, and so on, while %* is
        replaced by all the parameters.  If no command is given, the
        current alias for name is shown. If no name is given, all
        aliases are listed.

Aliases may be nested and can contain anything that can be
        legally typed at the pdb prompt.  Note!  You *can* override
        internal pdb commands with aliases!  Those internal commands
        are then hidden until the alias is removed.  Aliasing is
        recursively applied to the first word of the command line; all
        other words in the line are left alone.

As an example, here are two useful aliases (especially when
        placed in the .pdbrc file):

# Print instance variables (usage "pi classInst")
        alias pi for k in %1.__dict__.keys(): print("%1.",k,"=",%1.__dict__[k])
        # Print instance variables in self
        alias ps pi self
        """
        args = arg.split()
        if len(args) == 0:
            keys = sorted(self.aliases.keys())
            for alias in keys:
                self.message("%s = %s" % (alias, self.aliases[alias]))
            return
        if args[0] in self.aliases and len(args) == 1:
            self.message("%s = %s" % (args[0], self.aliases[args[0]]))
        else:
            self.aliases[args[0]] = ' '.join(args[1:])

def do_unalias(self, arg):
        """unalias name
        Delete the specified alias.
        """
        args = arg.split()
        if len(args) == 0: return
        if args[0] in self.aliases:
            del self.aliases[args[0]]

def complete_unalias(self, text, line, begidx, endidx):
        return [a for a in self.aliases if a.startswith(text)]

# List of all the commands making the program resume execution.
    commands_resuming = ['do_continue', 'do_step', 'do_next', 'do_return',
                         'do_quit', 'do_jump']

# Print a traceback starting at the top stack frame.
    # The most recently entered frame is printed last;
    # this is different from dbx and gdb, but consistent with
    # the Python interpreter's stack trace.
    # It is also consistent with the up/down commands (which are
    # compatible with dbx and gdb: up moves towards 'main()'
    # and down moves towards the most recent stack frame).

def print_stack_trace(self):
        try:
            for frame_lineno in self.stack:
                self.print_stack_entry(frame_lineno)
        except KeyboardInterrupt:
            pass

def print_stack_entry(self, frame_lineno, prompt_prefix=line_prefix):
        frame, lineno = frame_lineno
        if frame is self.curframe:
            prefix = '> '
        else:
            prefix = '  '
        self.message(prefix +
                     self.format_stack_entry(frame_lineno, prompt_prefix))

# Provide help

def do_help(self, arg):
        """h(elp)
        Without argument, print the list of available commands.
        With a command name as argument, print help about that command.
        "help pdb" shows the full pdb documentation.
        "help exec" gives help on the ! command.
        """
        if not arg:
            return cmd.Cmd.do_help(self, arg)
        try:
            try:
                topic = getattr(self, 'help_' + arg)
                return topic()
            except AttributeError:
                command = getattr(self, 'do_' + arg)
        except AttributeError:
            self.error('No help for %r' % arg)
        else:
            if sys.flags.optimize >= 2:
                self.error('No help for %r; please do not run Python with -OO '
                           'if you need command help' % arg)
                return
            self.message(command.__doc__.rstrip())

do_h = do_help

def help_exec(self):
        """(!) statement
        Execute the (one-line) statement in the context of the current
        stack frame.  The exclamation point can be omitted unless the
        first word of the statement resembles a debugger command.  To
        assign to a global variable you must always prefix the command
        with a 'global' command, e.g.:
        (Pdb) global list_options; list_options = ['-l']
        (Pdb)
        """
        self.message((self.help_exec.__doc__ or '').strip())

def help_pdb(self):
        help()

# other helper functions

def lookupmodule(self, filename):
        """Helper function for break/clear parsing -- may be overridden.

lookupmodule() translates (possibly incomplete) file or module name
        into an absolute file name.
        """
        if os.path.isabs(filename) and  os.path.exists(filename):
            return filename
        f = os.path.join(sys.path[0], filename)
        if  os.path.exists(f) and self.canonic(f) == self.mainpyfile:
            return f
        root, ext = os.path.splitext(filename)
        if ext == '':
            filename = filename + '.py'
        if os.path.isabs(filename):
            return filename
        for dirname in sys.path:
            while os.path.islink(dirname):
                dirname = os.readlink(dirname)
            fullname = os.path.join(dirname, filename)
            if os.path.exists(fullname):
                return fullname
        return None

def _runscript(self, filename):
        # The script has to run in __main__ namespace (or imports from
        # __main__ will break).
        #
        # So we clear up the __main__ and set several special variables
        # (this gets rid of pdb's globals and cleans old variables on restarts).
        import __main__
        __main__.__dict__.clear()
        __main__.__dict__.update({"__name__"    : "__main__",
                                  "__file__"    : filename,
                                  "__builtins__": __builtins__,
                                 })

# When bdb sets tracing, a number of call and line events happens
        # BEFORE debugger even reaches user's code (and the exact sequence of
        # events depends on python version). So we take special measures to
        # avoid stopping before we reach the main script (see user_line and
        # user_call for details).
        self._wait_for_mainpyfile = True
        self.mainpyfile = self.canonic(filename)
        self._user_requested_quit = False
        with open(filename, "rb") as fp:
            statement = "exec(compile(%r, %r, 'exec'))" % \
                        (fp.read(), self.mainpyfile)
        self.run(statement)

# Collect all command help into docstring, if not run with -OO

if __doc__ is not None:
    # unfortunately we can't guess this order from the class definition
    _help_order = [
        'help', 'where', 'down', 'up', 'break', 'tbreak', 'clear', 'disable',
        'enable', 'ignore', 'condition', 'commands', 'step', 'next', 'until',
        'jump', 'return', 'retval', 'run', 'continue', 'list', 'longlist',
        'args', 'p', 'pp', 'whatis', 'source', 'display', 'undisplay',
        'interact', 'alias', 'unalias', 'debug', 'quit',
    ]

for _command in _help_order:
        __doc__ += getattr(Pdb, 'do_' + _command).__doc__.strip() + '\n\n'
    __doc__ += Pdb.help_exec.__doc__

del _help_order, _command

# Simplified interface

def run(statement, globals=None, locals=None):
    Pdb().run(statement, globals, locals)

def runeval(expression, globals=None, locals=None):
    return Pdb().runeval(expression, globals, locals)

def runctx(statement, globals, locals):
    # B/W compatibility
    run(statement, globals, locals)

def runcall(*args, **kwds):
    return Pdb().runcall(*args, **kwds)

def set_trace():
    Pdb().set_trace(sys._getframe().f_back)

# Post-Mortem interface

def post_mortem(t=None):
    # handling the default
    if t is None:
        # sys.exc_info() returns (type, value, traceback) if an exception is
        # being handled, otherwise it returns None
        t = sys.exc_info()[2]
    if t is None:
        raise ValueError("A valid traceback must be passed if no "
                         "exception is being handled")

p = Pdb()
    p.reset()
    p.interaction(None, t)

def pm():
    post_mortem(sys.last_traceback)

# Main program for testing

TESTCMD = 'import x; x.main()'

def test():
    run(TESTCMD)

# print help
def help():
    import pydoc
    pydoc.pager(__doc__)

_usage = """\
usage: pdb.py [-c command] ... pyfile [arg] ...

Debug the Python program given by pyfile.

Initial commands are read from .pdbrc files in your home directory
and in the current directory, if they exist.  Commands supplied with
-c are executed after commands from .pdbrc files.

To let the script run until an exception occurs, use "-c continue".
To let the script run up to a given line X in the debugged file, use
"-c 'until X'"."""

def main():
    import getopt

opts, args = getopt.getopt(sys.argv[1:], 'hc:', ['--help', '--command='])

if not args:
        print(_usage)
        sys.exit(2)

commands = []
    for opt, optarg in opts:
        if opt in ['-h', '--help']:
            print(_usage)
            sys.exit()
        elif opt in ['-c', '--command']:
            commands.append(optarg)

mainpyfile = args[0]     # Get script filename
    if not os.path.exists(mainpyfile):
        print('Error:', mainpyfile, 'does not exist')
        sys.exit(1)

sys.argv[:] = args      # Hide "pdb.py" and pdb options from argument list

# Replace pdb's dir with script's dir in front of module search path.
    sys.path[0] = os.path.dirname(mainpyfile)

# Note on saving/restoring sys.argv: it's a good idea when sys.argv was
    # modified by the script being debugged. It's a bad idea when it was
    # changed by the user from the command line. There is a "restart" command
    # which allows explicit specification of command line arguments.
    pdb = Pdb()
    pdb.rcLines.extend(commands)
    while True:
        try:
            pdb._runscript(mainpyfile)
            if pdb._user_requested_quit:
                break
            print("The program finished and will be restarted")
        except Restart:
            print("Restarting", mainpyfile, "with arguments:")
            print("\t" + " ".join(args))
        except SystemExit:
            # In most cases SystemExit does not warrant a post-mortem session.
            print("The program exited via sys.exit(). Exit status:", end=' ')
            print(sys.exc_info()[1])
        except SyntaxError:
            traceback.print_exc()
            sys.exit(1)
        except:
            traceback.print_exc()
            print("Uncaught exception. Entering post mortem debugging")
            print("Running 'cont' or 'step' will restart the program")
            t = sys.exc_info()[2]
            pdb.interaction(None, t)
            print("Post mortem debugger finished. The " + mainpyfile +
                  " will be restarted")

# When invoked as main program, invoke the debugger on a script
if __name__ == '__main__':
    import pdb
    pdb.main()